Free Binary Options Signals Minimum 78% Winning Ratio

RESULTS of the State of the Game Survey: September 2020

Hi all,

It’s time for the results!

Thank you to everyone who took the time to respond - we had over 1,750 responses, which is great! These insights wouldn’t be possible without your time and support.

As always, neither myself nor this survey are associated with Intelligent Systems or Nintendo in any way. Please direct feedback about the game itself to the official channels.

Now let’s get into it!
 
Previous Survey Results:
April_2020_State_of_the_Game_Survey

~ Demographics ~

53.8% began playing FE:H in February 2017, with 20.0% more joining during the first year of the game. 12.0% of respondents joined during the second year, 8.7% joined during the third, and 4.0% joined during the fourth year (the last ~7 months).

The age range breakdown of respondents is as follows:

75.8% of respondents identified as Male, 18.4% as Female, and 3.0% as Non-binary.

24.6% of respondents have never missed a daily login, while a further 38.8% have missed less than a month’s worth of logins, 11.7% missed 1-2 months, 9.9% missed 3-6 months, 5.8% missed 7-12 months, and 4.7% missed over a year’s worth.

33.5% report being F2P, while 28.7% have spent less than $100, 18.3% spent between $100 - $499, 7.3% spent between $500 - $999, and 8.7% have spent over $1000.

46.6% last spent money on FE:H during the fourth year of the game (the last 3 months), while 6.6% last spent money during the third year of the game, 5.8% last spent during the second year of the game, and 5.1% last spent money during the first year of the game.

~ Summoning ~

“Which of the following banners have you used orbs on at least once?”
  • (86.8%) A New Future (CYL 4)
  • (60.2%) Overseas Memories (3H Summer)
  • (59.8%) Dark Burdens (Fallen Heroes)
  • (57.9%) Legendary Heroes: Edelgard
  • (55.2%) Legendary Heroes: Corrin
  • (53.1%) Book IV Mid: Mirabilis and More
  • (52.9%) Hero Fest
  • (52.2%) Pirate’s Pride
  • (44.5%) Mythic Heroes: Hel
  • (44.2%) Mythic Heroes: Mila
  • (43.7%) Bridal Beloveds
  • (39.6%) Summer Passing (Sacred Stones Summer (mostly))
  • (37.5%) Legendary Heroes: Seliph
  • (31.1%) Light and Shadow (New Mystery)

“Which of the following banners did you use the most orbs on?”
  • (44.8%) A New Future (CYL 4)
  • (8.6%) Overseas Memories (3H Summer)
  • (5.9%) Legendary Heroes: Corrin
  • (5.8%) Dark Burdens (Fallen Heroes)
  • (5.5%) Pirate’s Pride
  • (4.9%) Legendary Heroes: Edelgard
  • (4.5%) Hero Fest
  • (3.5%) Mythic Heroes: Hel
  • (3.0%) Bridal Beloveds
  • (2.8%) Book IV Mid: Mirabilis and More
  • (2.5%) Summer Passing (Sacred Stones Summer (mostly))
  • (2.5%) Legendary Heroes: Seliph
  • (2.3%) Mythic Heroes: Mila
  • (1.7%) Light and Shadow (New Mystery)

“What was your favorite banner?”
  • (37.4%) A New Future (CYL 4)
  • (10.9%) Dark Burdens (Fallen Heroes)
  • (8.9%) Pirate’s Pride
  • (8.5%) Overseas Memories (3H Summer)
  • (5.7%) Hero Fest
  • (5.4%) Legendary Heroes: Corrin
  • (3.3%) Legendary Heroes: Edelgard
  • (2.9%) Legendary Heroes: Seliph
  • (2.6%) Book IV Mid: Mirabilis and More
  • (2.6%) Bridal Beloveds
  • (2.5%) Summer Passing (Sacred Stones Summer (mostly))
  • (2.3%) Light and Shadow (New Mystery)
  • (1.5%) Mythic Heroes: Hel
  • (1.4%) Mythic Heroes: Mila

“Did you spend money specifically to summon on any of the banners below?”
  • (17.6%) A New Future (CYL 4)
  • (10.3%) Overseas Memories (3H Summer)
  • (8.9%) Legendary Heroes: Corrin
  • (6.8%) Dark Burdens (Fallen Heroes)
  • (6.6%) Pirate’s Pride
  • (6.5%) Legendary Heroes: Edelgard
  • (5.8%) Hero Fest
  • (5.1%) Bridal Beloveds
  • (4.9%) Mythic Heroes: Hel
  • (4.8%) Book IV Mid: Mirabilis and More
  • (4.8%) Mythic Heroes: Mila
  • (4.8%) Summer Passing (Sacred Stones Summer (mostly))
  • (3.4%) Light and Shadow (New Mystery)
  • (3.3%) Legendary Heroes: Seliph

~ Summoning Mechanics ~

33.7% spent orbs on the Hero Fest banner AFTER Intelligent Systems announced how they would be compensating players for the Hero Fest banner glitch, compared to 61.7% who did not.

30.5% say that knowing about the compensation for the Hero Fest banner glitch caused them to spend more orbs on the banner than they would have otherwise, compared to 41.5% who say it did not. 28.0% did not spend orbs on the Hero Fest banner.

34.3% feel positively or very positively about the quality of 4* focuses on regular banners, compared to 26.9% who feel negatively or very negatively.

69.7% feel positively or very positively about the quality of 4* focuses on seasonal banners, compared to 7.8% who feel negatively or very negatively.

53.8% report that the system guaranteeing a free 5* after 40 summons generally makes them summon more, while 5.4% report that it generally makes them summon less and 36.1% report no change in their summoning habits on New Heroes banners.

“If all New Heroes Banners used the permanent 40-summons-for-a-guaranteed-5* system that CYL4 used, how would your orb-spending habits on New Heroes banners change?”
  • (1.8%) I would spend fewer orbs than I did before
  • (22.3%) I would spend the same amount of orbs I usually do
  • (10.3%) I would spend more orbs than I did before
  • (62.2%) My spending would depend more on the Heroes offered

~ Choose Your Legends IV ~

“Which CYL4 Brave Heroes have you summoned, whether from the guaranteed choice banner or the regular banner?”
  • (78.0%) Dimitri
  • (73.4%) Claude
  • (65.7%) Edelgard
  • (56.6%) Lysithea

Of the summoning milestones on the CYL4 banner:
  • (20.2%) did not reach any of these summoning milestones
  • (79.7%) reached 40 summons
  • (41.0%) reached 80 summons
  • (19.8%) reached 120 summons
  • (11.1%) reached 160 summons

45.7% say that the free 5* hero at 40, 80, 120 and 160 summons caused them to spend more on CYL4 than they would have otherwise, while 50.3% say it did not.

22.8% say that the potential use of a new Brave Hero in future F2P Guides for content such as Hero Battles influenced their Brave Heroes summons, compared to 74.0% who say it did not.

“If you could only get ONE of the new Brave Heroes, which one would you choose?”
  • (36.8%) Dimitri
  • (28.9%) Edelgard
  • (22.9%) Claude
  • (7.8%) Lysithea

“Which Brave Hero do you believe is the overall strongest?”
  • (60.7%) Edelgard
  • (21.9%) Dimitri
  • (7.9%) Claude
  • (1.2%) Lysithea

“Which Brave Hero do you believe is the overall weakest?”
  • (61.2%) Lysithea
  • (13.7%) Claude
  • (7.0%) Dimitri
  • (1.7%) Edelgard

“Which Brave Hero do you believe has the best art?”
  • (32.9%) Claude
  • (27.3%) Dimitri
  • (20.1%) Lysithea
  • (13.3%) Edelgard

“Which set of Brave Heroes is your favorite overall?”
  • (24.2%) 1st CYL (Ike, Lucina, Lyn, Roy)
  • (19.4%) 2nd CYL (Ephraim, Celica, Hector, Veronica)
  • (11.2%) 3rd CYL (Alm, Camilla, Eliwood, Micaiah)
  • (39.9%) 4th CYL (Claude, Dimitri, Edelgard, Lysithea)

23.6% feel positively or very positively about the addition of Jorge as the CYL4 GHB hero, compared to 33.0% who feel negatively or very negatively.

86.3% believe CYL5 should add further protections against vote botting, compared to 4.4% who do not.

70.1% believe CYL5 should require Nintendo Account sign-in to vote, compared to 12.6% who do not.

~ Feh Pass and Resplendent Heroes ~

41.2% feel negatively about the addition of the Feh Pass (down 15.8% from the last survey), compared to 11.6% who feel positively (up 1.5% from the last survey). 46.1% are neutral (up 14.3% from the last survey).

40.2% have purchased the Feh Pass, compared to 59.8% who have not. This is a 9.5% increase compared to the last survey, following a 6.7% increase before that.

Of those who have subscribed to Feh Pass, 17.4% have purchased Resplendent Heroes separately (up 12.9% from the last survey), compared to 82.6% who have not.

“Which Resplendent Hero has your favorite art?”
  • (13.4%) Cordelia
  • (12.8%) Eliwood
  • (8.7%) Eirika
  • (8.4%) Olwen
  • (7.5%) Sophia
  • (7.3%) Minerva
  • (6.0%) Azura
  • (5.7%) Lyn
  • (5.2%) Ike
  • (4.1%) Sanaki
  • (4.0%) Roy
  • (3.7%) M!Robin
  • (2.3%) Hector
  • (1.6%) Linde
  • (1.3%) Alm

“Which Resplendent outfit theme is your favorite?”
  • (16.3%) Muspell
  • (15.0%) Askr
  • (14.8%) Nifl
  • (11.5%) Embla
  • (11.5%) Hel
  • (10.3%) Ljosalfheimr

~ Miscellaneous ~

15.8% feel positively about the introduction of Harmonized Heroes, compared to 31.3% who feel negatively.

29.5% have a Harmonized Hero, compared to 70.1% who do not.

14.6% feel positively or very positively about the Resonant Battles game mode, compared to 51.5% who feel negatively or very negatively.

4.6% say that the Resonant Battles game mode influenced them to pull for Harmonized Heroes, compared to 94.5% who say it has not.

34.8% believe the new Arena maps are better than the maps they replaced, while 7.4% believe they are worse, and 36.7% believe they are about the same.

“How often do you use Auto Dispatch in Aether Raids?”
  • (34.3%) All of them, always
  • (0.2%) All of them, in Light Season
  • (3.6%) All of them, in Astra season
  • (24.3%) Only sometimes
  • (37.6%) I never use it

“IV Mango” is the preferred term for Trait Fruit according to 32.2% of respondents, followed by “IVcado” at 28.9%, “Fruit” at 7.6%, and “Dragonfruit” at 6.6%. The remaining 24.7% prefer to just call them Trait Fruit.

39.3% say they will use their first Trait Fruits on a Heroic Grails unit, while 32.9% say they will use them on a Summonable unit, and 1.3% say they will use them on an Askr unit.

58.7% prefer Stat Boosts for Legendary Heroes, compared to 26.3% who prefer Pair-Up.

56.5% generally prefer Regular Duo Heroes, compared to 8.8% who prefer Harmonized Duo Heroes.

1.8% say that the update that raised the minimum hardware/software required to play the game affected their ability to play FE:H, compared to 95.8% who say it did not.

~ Recurring Miscellaneous ~

“Which game do you want a New Heroes banner from the most?”
  • (26.0%) Three Houses (-1.9%)
  • (9.7%) Radiant Dawn (+0.5%)
  • (7.7%) Sacred Stones (+0.2%)
  • (7.5%) Awakening (-3.1%)
  • (6.4%) Genealogy of the Holy War (-1.3%)
  • (6.1%) Path of Radiance (-0.9%)
  • (6.0%) Gaiden / Shadows of Valentia (+2.7%)
  • (5.9%) TMS #FE (+1.9%)
  • (5.4%) Blazing Blade (+1.3%)
  • (5.0%) Fates (+1.0%)
  • (4.2%) Thracia 776 (+0.8%)
  • (2.4%) Binding Blade (+0.6%)
  • (0.8%) Shadow Dragon and the Blade of Light / Shadow Dragon (-1.0%)
  • (0.8%) Mystery of the Emblem / New Mystery of the Emblem (-1.1%)

“How much do you care about your rank in the following modes?”
  • (2.90/5.00 average) Arena
  • (2.82/5.00 average) Aether Raids
  • (2.48/5.00 average) PvE game modes with player ranking boards
  • (1.82/5.00 average) Arena Assault

“How have recent changes to FE:H changed your opinion on the game as a whole?”
  • (39.3%) My opinion was positive and has stayed positive
  • (5.7%) My opinion used to be negative, but has turned positive
  • (40.1%) Neutral
  • (9.9%) My opinion used to be positive, but has turned negative
  • (5.1%) My opinion was negative and has stayed negative

~ Intelligent Systems Approval Ratings ~

The approval ratings are calculated by the proportion of Approve responses compared to the number of both Approve and Disapprove responses.

Percent who approve of the way Intelligent Systems is handling:
  • 74.6% - The addition of new heroes / characters to the game (+11.9)
  • 69.4% - The gacha mechanics and summoning banners (+5.5)
  • 59.2% - The story/plot (+9.4)
  • 85.2% - Unranked PvE game modes (Hero Battles, Forging Bonds, Tactics Drills, Lost Lore, Hall of Forms) (-1.2)
  • 50.7% - Ranked PvE game modes (Voting Gauntlets, Tempest Trials, Grand Conquest, Allegiance Battles, Rokkr Sieges, Mjolnir's Strike) (-2.6)
  • 34.6% - Arena (-6.2)
  • 48.0% - Arena Assault (+6.7)
  • 45.8% - Aether Raids (+12.7)

40.5% believe Intelligent Systems cares about its Free to Play userbase (up 10.1% from the last survey), while 34.7% do not. This continues the upward trend from the previous survey, bringing us to 8.8% down from where we were before the February drop).

42.9% approve of the way Intelligent Systems is handling Fire Emblem: Heroes as a whole (up 14.8% from the last survey), while 16.9% disapprove. This continues the upward trend from the previous survey, bringing us to only 2.5% down from where we were before the February drop).

A NOTE ABOUT METHODOLOGY: The overall approval ratings question above has traditionally been the exact percent of Approve responses, as a proportion with both Neutral and Disapprove responses. Note that this is different than the way approval is calculated for individual modes (the proportion of Approve responses compared to the number of both Approve and Disapprove responses), where Neutral responses are excluded. The difference in calculation has continued this way in order to maintain comparability with previous survey results.
For comparisons sake, the overall approval rating trend going by raw Approval percentage over the last 4 surveys is: 50.6% (Dec) -> 22.9% (Feb) -> 28.1% (Apr) -> 42.9% (Sept)
Whereas the overall approval rating trend going by proportion of Approve/Disapprove with the Neutrals excluded over the last 4 surveys is: 82.2% (Dec) -> 41.0% (Feb) -> 51.3% (Apr) -> 71.7% (Sept).

~ Bonus Questions ~

“Who is your Favorite Hero added since the last survey?”
  • Dimitri (Brave) is the winner, followed by Edelgard (Brave), then Claude (Brave).
  • Full results here: [Graph]

“Who is your Most Wanted Hero added since the last survey?”
  • Tibarn (Pirate) is the winner, followed by Corrin (F, Legendary), then Micaiah (Duo, Bridal).
  • Full results here: [Graph].

“What would be the best Harmonized Hero (a pair of two heroes from different games) and why?”:

Rather than selecting a subset of responses this time, the link below is to a google sheet of almost all unique responses. I cleaned it up a little bit to remove “idk” type answers, duplicates, and partial string duplicates, so don’t worry if you don’t see your exact response in it.

[Full Responses].

~ Feedback ~

As always, I received lots of great feedback, both in your survey responses and in the thread itself. A heartfelt thank you to all participants for your encouragements and criticisms - these surveys wouldn’t be where they are without your feedback. But it’s not all serious; feedback messages also included:

  • #FloofMomGang #GiveLeoAGoodFuckingAltForOnce #NowiRefineWhen #TelliusNewHeroesPlz #ElinciaResplendentWhen #JusticeForDedue #PleaseRemoveLChromInstysIAmBeggingYouICantLiveLikeThisAnymore
  • “There once was a CYL4 banner / That hit my orbs hard like a hammer / The very next day / FloomMom Duo came our way / Now I'm stuck bartering with a loan planner”
  • bonk, go to survey jail”
  • “Am I also allowed to put in "Norne and Azura" for a Harmonized Hero pair? No reason.”
  • “Brace yourself. Winter (armours) are coming!” “Brave Hector's refine has made me so very happy with it's inclusion. Go shove your bow up your butt Legendary Chrom.”
  • “Give me villager alts or give me death”
  • “I expect the next survey to come with +12 to attack, null follow up, and special cooldown reduction.”
  • “The true best Harmonized Hero would be Azura and Roy since it would make me uninstall the game and never want to play a gacha ever again”
  • “My headcanon for the dream storyline is that the evil fairies have the Summoner off picking up pebbles that look like orbs. Fredrickson would be proud.”
  • “Where's the most wanted unit to add to the game question so I can shout my want for Seteth into the void?”
  • “I no longer dab, for Legendary Seliph has finally appeared.”
  • And greetings from Argentina, the Bahamas, Brazil, Chile, Colombia, Finland, Germany, Greece, Hong Kong, Ireland, Russia, South Korea, Sweden, the UK, Vietnam, the Pacific Northwest, Alaska, Toronto, and St. Louis, as well as from many fictional locations!
And some personal/meta comments:
  • “Any chance we end up seeing another Super Serious Survey in the not-so-distant future?” -> I could not believe it’s been over a year since the last one! We’ll have to do one soon!
  • “Feels like the end of an era, not having to count all my five stars” -> I know, right? I may have it return in a side survey for the most hardcore of respondents at some point, since some people are asking about it and it would be good to get data on it every once in a while.
  • “I was looking through your Nornes skills and saw you haven't given her live for bounty yet! It's the best skill for her, what are you doing!?” -> I am a fraud :( I have given her Live for Honor though :P
  • “What do you hope for in FEH?” -> Norne alt, Resplendent Jaffar, and Shamir
  • Multiple people mentioned that they had returned after a long break and were surprised to see Norne instead of Azura! Welcome back!
  • I also missed a bunch of other possible Trait Fruit nicknames, which I knew would inevitably happen. Sorry!

Note: Please don’t ask me to feature your feedback comment; it’s the only guaranteed way to not have your comment added!

Finally, the suggestion to have separate options for serious vs non-serious feedback was a good idea, I’ll try that out on the next survey!

~ Closing Remarks ~

If you missed out on responding to this survey when it was available, consider subscribing to FEHSurveys. This subreddit serves as a place to organize FE:H-related surveys, make new releases more visible, and make it easier for users to see when surveys are active.

Thanks again to everyone who participated! I hope you find the results interesting, and if there’s anything else you think can be discovered from the data, let me know and I’ll do my best to oblige!
 
 
Weekly/Important Megathreads:
Weekly Discussion Megathread
Tempest Trials+: Dancing Affinity Megathread
Forging Bonds: Beyond Blood Rebout Megathread
Limited Hero Battles Megathread
submitted by ShiningSolarSword to FireEmblemHeroes [link] [comments]

Forex Signals Reddit: top providers review (part 1)

Forex Signals Reddit: top providers review (part 1)

Forex Signals - TOP Best Services. Checked!

To invest in the financial markets, we must acquire good tools that help us carry out our operations in the best possible way. In this sense, we always talk about the importance of brokers, however, signal systems must also be taken into account.
The platforms that offer signals to invest in forex provide us with alerts that will help us in a significant way to be able to carry out successful operations.
For this reason, we are going to tell you about the importance of these alerts in relation to the trading we carry out, because, without a doubt, this type of system will provide us with very good information to invest at the right time and in the best assets in the different markets. financial
Within this context, we will focus on Forex signals, since it is the most important market in the world, since in it, multiple transactions are carried out on a daily basis, hence the importance of having an alert system that offers us all the necessary data to invest in currencies.
Also, as we all already know, cryptocurrencies have become a very popular alternative to investing in traditional currencies. Therefore, some trading services/tools have emerged that help us to carry out successful operations in this particular market.
In the following points, we will detail everything you need to know to start operating in the financial markets using trading signals: what are signals, how do they work, because they are a very powerful help, etc. Let's go there!

What are Forex Trading Signals?

https://preview.redd.it/vjdnt1qrpny51.jpg?width=640&format=pjpg&auto=webp&s=bc541fc996701e5b4dd940abed610b59456a5625
Before explaining the importance of Forex signals, let's start by making a small note so that we know what exactly these alerts are.
Thus, we will know that the signals on the currency market are received by traders to know all the information that concerns Forex, both for assets and for the market itself.
These alerts allow us to know the movements that occur in the Forex market and the changes that occur in the different currency pairs. But the great advantage that this type of system gives us is that they provide us with the necessary information, to know when is the right time to carry out our investments.
In other words, through these signals, we will know the opportunities that are presented in the market and we will be able to carry out operations that can become quite profitable.
Profitability is precisely another of the fundamental aspects that must be taken into account when we talk about Forex signals since the vast majority of these alerts offer fairly reliable data on assets. Similarly, these signals can also provide us with recommendations or advice to make our operations more successful.

»Purpose: predict movements to carry out Profitable Operations

In short, Forex signal systems aim to predict the behavior that the different assets that are in the market will present and this is achieved thanks to new technologies, the creation of specialized software, and of course, the work of financial experts.
In addition, it must also be borne in mind that the reliability of these alerts largely lies in the fact that they are prepared by financial professionals. So they turn out to be a perfect tool so that our investments can bring us a greater number of benefits.

The best signal services today

We are going to tell you about the 3 main alert system services that we currently have on the market. There are many more, but I can assure these are not scams and are reliable. Of course, not 100% of trades will be a winner, so please make sure you apply proper money management and risk management system.

1. 1000pipbuilder (top choice)

Fast track your success and follow the high-performance Forex signals from 1000pip Builder. These Forex signals are rated 5 stars on Investing.com, so you can follow every signal with confidence. All signals are sent by a professional trader with over 10 years investment experience. This is a unique opportunity to see with your own eyes how a professional Forex trader trades the markets.
The 1000pip Builder Membership is ordinarily a signal service for Forex trading. You will get all the facts you need to successfully comply with the trading signals, set your stop loss and take earnings as well as additional techniques and techniques!
You will get easy to use trading indicators for Forex Trades, including your entry, stop loss and take profit. Overall, the earnings target per months is 350 Pips, depending on your funding this can be a high profit per month! (In fact, there is by no means a guarantee, but the past months had been all between 600 – 1000 Pips).
>>>Know more about 1000pipbuilder
Your 1000pip builder membership gives you all in hand you want to start trading Forex with success. Read the directions and wait for the first signals. You can trade them inside your demo account first, so you can take a look at the performance before you make investments real money!
Features:
  • Free Trial
  • Forex signals sent by email and SMS
  • Entry price, take profit and stop loss provided
  • Suitable for all time zones (signals sent over 24 hours)
  • MyFXBook verified performance
  • 10 years of investment experience
  • Target 300-400 pips per month
Pricing:
https://preview.redd.it/zjc10xx6ony51.png?width=668&format=png&auto=webp&s=9b0eac95f8b584dc0cdb62503e851d7036c0232b
VISIT 1000ipbuilder here

2. DDMarkets

Digital Derivatives Markets (DDMarkets) have been providing trade alert offerings since May 2014 - fully documenting their change ideas in an open and transparent manner.
September 2020 performance report for DD Markets.
Their manner is simple: carry out extensive research, share their evaluation and then deliver a trading sign when triggered. Once issued, daily updates on the trade are despatched to members via email.
It's essential to note that DDMarkets do not tolerate floating in an open drawdown in an effort to earnings at any cost - a common method used by less professional providers to 'fudge' performance statistics.
Verified Statistics: Not independently verified.
Price: plans from $74.40 per month.
Year Founded: 2014
Suitable for Beginners: Yes, (includes handy to follow trade analysis)
VISIT
-------

3. JKonFX

If you are looking or a forex signal service with a reliable (and profitable) music record you can't go previous Joel Kruger and the team at JKonFX.
Trading performance file for JKonFX.
Joel has delivered a reputable +59.18% journal performance for 2016, imparting real-time technical and fundamental insights, in an extremely obvious manner, to their 30,000+ subscriber base. Considered a low-frequency trader, alerts are only a small phase of the overall JKonFX subscription. If you're searching for hundreds of signals, you may want to consider other options.
Verified Statistics: Not independently verified.
Price: plans from $30 per month.
Year Founded: 2014
Suitable for Beginners: Yes, (includes convenient to follow videos updates).
VISIT

The importance of signals to invest in Forex

Once we have known what Forex signals are, we must comment on the importance of these alerts in relation to our operations.
As we have already told you in the previous paragraph, having a system of signals to be able to invest is quite advantageous, since, through these alerts, we will obtain quality information so that our operations end up being a true success.

»Use of signals for beginners and experts

In this sense, we have to say that one of the main advantages of Forex signals is that they can be used by both beginners and trading professionals.
As many as others can benefit from using a trading signal system because the more information and resources we have in our hands. The greater probability of success we will have. Let's see how beginners and experts can take advantage of alerts:
  • Beginners: for inexperienced these alerts become even more important since they will thus have an additional tool that will guide them to carry out all operations in the Forex market.
  • Professionals: In the same way, professionals are also recommended to make use of these alerts, so they have adequate information to continue bringing their investments to fruition.
Now that we know that both beginners and experts can use forex signals to invest, let's see what other advantages they have.

»Trading automation

When we dedicate ourselves to working in the financial world, none of us can spend 24 hours in front of the computer waiting to perform the perfect operation, it is impossible.
That is why Forex signals are important, because, in order to carry out our investments, all we will have to do is wait for those signals to arrive, be attentive to all the alerts we receive, and thus, operate at the right time according to the opportunities that have arisen.
It is fantastic to have a tool like this one that makes our work easier in this regard.

»Carry out profitable Forex operations

These signals are also important, because the vast majority of them are usually quite profitable, for this reason, we must get an alert system that provides us with accurate information so that our operations can bring us great benefits.
But in addition, these Forex signals have an added value and that is that they are very easy to understand, therefore, we will have a very useful tool at hand that will not be complicated and will end up being a very beneficial weapon for us.

»Decision support analysis

A system of currency market signals is also very important because it will help us to make our subsequent decisions.
We cannot forget that, to carry out any type of operation in this market, previously, we must meditate well and know the exact moment when we will know that our investments are going to bring us profits .
Therefore, all the information provided by these alerts will be a fantastic basis for future operations that we are going to carry out.

»Trading Signals made by professionals

Finally, we have to recall the idea that these signals are made by the best professionals. Financial experts who know perfectly how to analyze the movements that occur in the market and changes in prices.
Hence the importance of alerts, since they are very reliable and are presented as a necessary tool to operate in Forex and that our operations are as profitable as possible.

What should a signal provider be like?

https://preview.redd.it/j0ne51jypny51.png?width=640&format=png&auto=webp&s=5578ff4c42bd63d5b6950fc6401a5be94b97aa7f
As you have seen, Forex signal systems are really important for our operations to bring us many benefits. For this reason, at present, there are multiple platforms that offer us these financial services so that investing in currencies is very simple and fast.
Before telling you about the main services that we currently have available in the market, it is recommended that you know what are the main characteristics that a good signal provider should have, so that, at the time of your choice, you are clear that you have selected one of the best systems.

»Must send us information on the main currency pairs

In this sense, one of the first things we have to comment on is that a good signal provider, at a minimum, must send us alerts that offer us information about the 6 main currencies, in this case, we refer to the euro, dollar, The pound, the yen, the Swiss franc, and the Canadian dollar.
Of course, the data you provide us will be related to the pairs that make up all these currencies. Although we can also find systems that offer us information about other minorities, but as we have said, at a minimum, we must know these 6.

»Trading tools to operate better

Likewise, signal providers must also provide us with a large number of tools so that we can learn more about the Forex market.
We refer, for example, to technical analysis above all, which will help us to develop our own strategies to be able to operate in this market.
These analyzes are always prepared by professionals and study, mainly, the assets that we have available to invest.

»Different Forex signals reception channels

They must also make available to us different ways through which they will send us the Forex signals, the usual thing is that we can acquire them through the platform's website, or by a text message and even through our email.
In addition, it is recommended that the signal system we choose sends us a large number of alerts throughout the day, in order to have a wide range of possibilities.

»Free account and customer service

Other aspects that we must take into account to choose a good signal provider is whether we have the option of receiving, for a limited time, alerts for free or the profitability of the signals they emit to us.
Similarly, a final aspect that we must emphasize is that a good signal system must also have excellent customer service, which is available to us 24 hours a day and that we can contact them at through an email, a phone number, or a live chat, for greater immediacy.
Well, having said all this, in our last section we are going to tell you which are the best services currently on the market. That is, the most suitable Forex signal platforms to be able to work with them and carry out good operations. In this case, we will talk about ForexPro Signals, 365 Signals and Binary Signals.

Forex Signals Reddit: conclusion

To be able to invest properly in the Forex market, it is convenient that we get a signal system that provides us with all the necessary information about this market. It must be remembered that Forex is a very volatile market and therefore, many movements tend to occur quickly.
Asset prices can change in a matter of seconds, hence the importance of having a system that helps us analyze the market and thus know, what is the right time for us to start operating.
Therefore, although there are currently many signal systems that can offer us good services, the three that we have mentioned above are the ones that are best valued by users, which is why they are the best signal providers that we can choose to carry out. our investments.
Most of these alerts are quite profitable and in addition, these systems usually emit a large number of signals per day with full guarantees. For all this, SignalsForexPro, Signals365, or SignalsBinary are presented as fundamental tools so that we can obtain a greater number of benefits when we carry out our operations in the currency market.
submitted by kayakero to makemoneyforexreddit [link] [comments]

🐻💩 - Bear shit on CRO

Grab your nuggets, I'm about to drop some bear shit on your CRO holdings.
TL;DR - It don't add up, I smell bear shit
I'm a gambler, some bio-tech firm in phase 3 trials for a Swiss Army dick transplant, sure, those blokes waiting for core samples on a big copper deposit, ok. These are bets, the payoff is known and binary, win/lose. But this isn't that.
CRO at .041
x Revenue of just $462k, yep thousands and trending down from $670k previous x No profit, again x Market cap at $63Million o.O WTF x Current liabilities are four times current assets x Nine staff and a 404 on their Team page x Been around in some form or another since 2001 and still hasn't rocketed x Twitter account is all about shareholders, not customers x Pivoted from Pool Management software with failed implementation at Clark Rubber into whatever they do now
It just doesn't smell right.
Now you're about talk to me about free money with their cheap Options offer, announced in a timely way, get in quick (Wednesday) or you'll miss out. FOMO!!! Ain't no such thing as free money with no downside, don't be retarded.
I don't hold CRO. I do have bets on Z1P TNT OSL RKT:NYSE
Flame suit on, burn away spastic believers and tell me about your true religion.
submitted by tao_of_bacon to ASX_Bets [link] [comments]

Subreddit Demographic Survey 2019 : The Results

Subreddit Demographic Survey 2019

1. Introduction

Once a year, this subreddit hosts a survey in order to get to know the community a little bit and in order to answer questions that are frequently asked here. Earlier this summer, a few thousand of you participated in a massive Subreddit Demographic Survey.
Unfortunately during the process of collating results we lost contact with SailorMercure, who in previous years has completed all of the data analysis from the Google form responses. We were therefore required to collate and analyse the responses from the raw data via Excel. I attach the raw data below for those who would like to review it. For 2020 we will be rebuilding the survey from scratch.
Raw Data
Multiple areas of your life were probed: general a/s/l, education, finances, religious beliefs, marital status, etc. They are separated in 10 sections:
  1. General Demographics
  2. Education Level
  3. Career and Finances
  4. Child Status
  5. Current Location
  6. Religion and Spirituality
  7. Sexual and Romantic Life
  8. Childhood and Family Life
  9. Sterilization
  10. Childfreedom

2. Methodology

Our sample is people from this subreddit who saw that we had a survey going on and were willing to complete the survey. A weekly stickied announcement was used to alert members of the community that a survey was being run.

3. Results

5,976 participants over the course of two months at a subscriber count of 588,488 (total participant ratio of slightly >1%)

3.1 General Demographics

5,976 participants in total

Age group

Age group Participants # Percentage
18 or younger 491 8.22%
19 to 24 1820 30.46%
25 to 29 1660 27.78%
30 to 34 1107 18.52%
35 to 39 509 8.52%
40 to 44 191 3.20%
45 to 49 91 1.52%
50 to 54 54 0.90%
55 to 59 29 0.49%
60 to 64 15 0.25%
65 to 69 4 0.07%
70 to 74 2 0.03%
75 or older 3 0.05%
84.97% of the sub is under the age of 35.

Gender and Gender Identity

4,583 participants out of 5,976 (71.54%) were assigned the gender of female at birth, 1,393 (23.31%) were assigned the gender of male at birth. Today, 4,275 (70.4%) participants identify themselves as female, 1,420 (23.76%) as male, 239 (4.00%) as non binary and 42 (0.7%) as other (from lack of other options).

Sexual Orientation

Sexual Orientation Participants # Percentage
Asexual 373 6.24%
Bisexual 1,421 23.78%
Heterosexual 3,280 54.89%
Homosexual 271 4.53%
It's fluid 196 3.28%
Other 95 1.59%
Pansexual 340 5.69%

Birth Location

Because the list contains over 120 countries, we'll show the top 20 countries:
Country of birth Participants # Percentage
United States 3,547 59.35%
Canada 439 7.35%
United Kingdom 414 6.93%
Australia 198 3.31%
Germany 119 1.99%
Netherlands 72 1.20%
France 68 1.14%
Poland 66 1.10%
India 59 0.99%
Mexico 49 0.82%
New Zealand 47 0.79%
Brazil 44 0.74%
Sweden 43 0.72%
Philippines 39 0.65%
Finland 37 0.62%
Russia 34 0.57%
Ireland 33 0.55%
Denmark 31 0.52%
Norway 30 0.50%
Belgium 28 0.47%
90.31% of the participants were born in these countries.

Ethnicity

That one was difficult for many reasons and didn't encompass all possibilities simply from lack of knowledge.
Ethnicity Participants # Percentage
Caucasian / White 4,583 76.69%
Hispanic / Latinx 332 5.56%
Multiracial 188 3.15%
East Asian 168 2.81%
Biracial 161 2.69%
African Descent / Black 155 2.59%
Indian / South Asian 120 2.01%
Other 83 1.39%
Jewish (the ethnicity, not the religion) 65 1.09%
Arab / Near Eastern / Middle Eastern 40 0.67%
American Indian or Alaskan Native 37 0.62%
Pacific Islander 24 0.40%
Aboriginal / Australian 20 0.33%

3.2 Education Level

5,976 participants in total

Current Level of Education

Highest Current Level of Education Participants # Percentage
Bachelor's degree 2061 34.49%
Some college / university 1309 21.90%
Master's degree 754 12.62%
Graduated high school / GED 721 12.06%
Associate's degree 350 5.86%
Trade / Technical / Vocational training 239 4.00%
Did not complete high school 238 3.98%
Professional degree 136 2.28%
Doctorate degree 130 2.18%
Post Doctorate 30 0.50%
Did not complete elementary school 8 0.13%

Future Education Plans

Educational Aims Participants # Percentage
I'm good where I am right now 1,731 28.97%
Master's degree 1,384 23.16%
Bachelor's degree 1,353 22.64%
Doctorate degree 639 10.69%
Vocational / Trade / Technical training 235 3.93%
Professional degree 214 3.58%
Post Doctorate 165 2.76%
Associate's degree 164 2.74%
Graduate high school / GED 91 1.52%
Of our 5,976 participants, a total of 1,576 (26.37%) returned to higher education after a break of 3+ years, the other 4,400 (73.76%) did not.
Degree (Major) Participants # Percentage
I don't have a degree or a major 1,010 16.90%
Other 580 9.71%
Health Sciences 498 8.33%
Engineering 455 7.61%
Information and Communication Technologies 428 7.16%
Arts and Music 403 6.74%
Social Sciences 361 6.04%
Business 313 5.24%
Life Sciences 311 5.20%
Literature and Languages 255 4.27%
Humanities 230 3.85%
Fundamental and Applied Sciences 174 2.91%
Teaching and Education Sciences 174 2.91%
Communication 142 2.38%
Law 132 2.21%
Economics and Politics 101 1.69%
Finance 94 1.57%
Social Sciences and Social Action 84 1.41%
Environment and Sustainable Development 70 1.17%
Marketing 53 0.89%
Administration and Management Sciences 52 0.87%
Environmental Planning and Design 24 0.40%
Fashion 18 0.30%
Theology and Religious Sciences 14 0.23%
A number of you commented in the free-form field at the end of the survey, that your degree was not present and that it wasn't related to any of the listed ones. We will try to mitigate this in the next survey!

3.3 Career and Finances

Out of the 5,976 participants, 2,199 (36.80%) work in the field they majored in, 953 (15.95%) graduated but do not work in their original field. 1,645 (27.53%) are still studying. The remaining 1,179 (19.73%) are either retired, currently unemployed or out of the workforce for unspecified reasons.
The top 10 industries our participants are working in are:
Industry Participants # Percentage
Health Care and Social Assistance 568 9.50%
Retail 400 6.69%
Arts, Entertainment, and Recreation 330 5.52%
College, University, and Adult Education 292 4.89%
Government and Public Administration 258 4.32%
Finance and Insurance 246 4.12%
Hotel and Food Services 221 3.70%
Scientific or Technical Services 198 3.31%
Software 193 3.23%
Information Services and Data Processing 169 2.83%
*Note that "other", "I'm a student" and "currently unemployed" have been disgregarded for this part of the evaluation.
Out of the 4,477 participants active in the workforce, the majority (1,632 or 36.45%) work between 40-50 hours per week, 34.73% (1,555) are working 30-40 hours weekly. Less than 6% work >50 h per week, and 23.87% (1,024 participants) less than 30 hours.
718 or 16.04% are taking over managerial responsibilities (ranging from Jr. to Sr. Management); 247 (5.52%) are self employed or partners.
On a scale of 1 (lowest) to 10 (highest), the overwhelming majority (4,009 or 67.09%) indicated that career plays a very important role in their lives, attributing a score of 7 and higher.
Only 663 (11.09%) gave it a score below 4, indicating a low importance.
The importance of climbing the career ladder is very evenly distributed across all participants and ranges in a harmonized 7-12% range for each of the 10 steps of importance.
23.71% (1,417) of the participants are making extra income with a hobby or side job.
From the 5,907 participants not already retired, the overwhelming majority of 3,608 (61.11%) does not actively seek early retirement. From those who are, most (1,024 / 17.34%) want to do so between 55-64; 7 and 11% respectively in the age brackets before or after. Less than 3.5% are looking for retirement below 45 years of age.
1,127 participants decided not to disclose their income brackets. The remaining 4,849 are distributed as follows:
Income Participants # Percentage
$0 to $14,999 1,271 26.21%
$15,000 to $29,999 800 16.50%
$30,000 to $59,999 1,441 29.72%
$60,000 to $89,999 731 15.08%
$90,000 to $119,999 300 6.19%
$120,000 to $149,999 136 2.80%
$150,000 to $179,999 67 1.38%
$180,000 to $209,999 29 0.60%
$210,000 to $239,999 22 0.45%
$240,000 to $269,999 15 0.31%
$270,000 to $299,999 5 0.10%
$300,000 or more 32 0.66%

3.4 Child Status

5,976 participants in total
94.44% of the participants (5,644) would call themselves "childfree" (as opposed to 5.56% of the participants who would not call themselves childfree. However, only 68.51% of the participants (4,094) do not have children and do not want them in any capacity at any point of the future. The other 31.49% have a varying degree of indecision, child wanting or child having on their own or their (future) spouse's part.
The 4,094 participants were made to participate in the following sections of the survey.

3.5 Current Location

4,094 childfree participants in total

Current Location

There were more than 200 options of country, so we are showing the top 10 CF countries.
Current Location Participants # Percentage
United States 2,495 60.94%
United Kingdom 331 8.09%
Canada 325 7.94%
Australia 146 3.57%
Germany 90 2.20%
Netherlands 66 1.61%
France 43 1.05%
Sweden 40 0.98%
New Zealand 33 0.81%
Poland 33 0.81%
The Top 10 amounts to 87.98% of the childfree participants' current location.

Current Location Qualification

These participants would describe their current city, town or neighborhood as:
Qualification Participants # Percentage
Urban 1,557 38.03%
Suburban 1,994 48.71%
Rural 543 13.26%

Tolerance to "Alternative Lifestyles" in Current Location

Figure 1
Figure 2
Figure 3

3.6 Religion and Spirituality

4094 childfree participants in total

Faith Originally Raised In

There were more than 50 options of faith, so we aimed to show the top 10 most chosen beliefs..
Faith Participants # Percentage
Christianity 2,624 64.09%
Atheism 494 12.07%
None (≠ Atheism. Literally, no notion of spirituality or religion in the upbringing) 431 10.53%
Agnosticism 248 6.06%
Judaism 63 1.54%
Other 45 1.10%
Hinduism 42 1.03%
Islam 40 0.98%
Buddhism 24 0.59%
Paganism 14 0.34%
This top 10 amounts to 98.3% of the 4,094 childfree participants.

Current Faith

There were more than 50 options of faith, so we aimed to show the top 10 most chosen beliefs:
Faith Participants # Percentage
Atheism 2,276 55.59%
Agnosticism 829 20.25%
Christianity 343 8.38%
Other 172 4.20%
Paganism 100 2.44%
Satanism 67 1.64%
Spiritualism 55 1.34%
Witchcraft 54 1.32%
Buddhism 43 1.05%
Judaism 30 0.73%
This top 10 amounts to 96.95% of the participants.

Level of Current Religious Practice

Level Participants # Percentage
Wholly secular / Non religious 3045 74.38%
Identify with religion, but don't practice strictly 387 9.45%
Lapsed / Not serious / In name only 314 7.67%
Observant at home only 216 5.28%
Observant at home. Church/Temple/Mosque/Etc. attendance 115 2.81%
Church/Temple/Mosque/Etc. attendance only 17 0.42%

Effect of Faith over Childfreedom

Figure 4

Effect of Childfreedom over Faith

Figure 5

3.7 Romantic and Sexual Life

4,094 childfree participants in total

Current Dating Situation

Status Participants # Percentage
Divorce 37 0.90
Engaged 215 5.25
Long term relationship, living together 758 18.51
Long term relationship, not living with together 502 12.26
Married 935 22.84
Other 69 1.69
Separated 10 0.24
Short term relationship 82 2.00
Single and dating around, but not looking for anything serious 234 5.72
Single and dating around, looking for something serious 271 6.62
Single and not looking 975 23.82
Widowed 6 0.15

Ethical Non-Monogamy

Non-monogamy (or nonmonogamy) is an umbrella term for every practice or philosophy of intimate relationship that does not strictly hew to the standards of monogamy, particularly that of having only one person with whom to exchange sex, love, and affection.
82.3% of the childfree participants do not practice ethical non-monogamy, as opposed to 17.7% who say they do.

Childfree Partner

Regarding to currently having a childfree or non childfree partner, excluding the 36.7% of childfree participants who said they do not have a partner at the moment. For this question only, only 2591 childfree participants are considered.
Partner Participants # Percentage
Childfree partner 2105 81.2%
Non childfree partner 404 9.9%
More than one partner; all childfree 53 1.3%
More than one partner; some childfree 24 0.9%
More than one partner; none childfree 5 0.2%

Dating a Single Parent

Would the childfree participants be willing to date a single parent?
Answer Participants # Percentage
No, I'm not interested in single parents and their ties to parenting life 3693 90.2
Yes, but only if it's a short term arrangement of some sort 139 3.4
Yes, whether for long term or short term, but with some conditions 161 3.9
Yes, whether for long term or short term, with no conditions 101 2.5

3.8 Childhood and Family Life

On a scale from 1 (very unhappy) to 10 (very happy), how would you rate your childhood?
Answer Participants # Percentage
1 154 3.8%
2 212 5.2%
3 433 10.6%
4 514 12.6%
5 412 10.1%
6 426 10.4%
7 629 15.4%
8 704 17.2%
9 357 8.7%
10 253 6.2%

3.9 Sterilization

4,094 childfree participants in total
Sterilization Status Participants # Percentage
No, I am not sterilized and, for medical, practical or other reasons, I do not need to be 687 16.8
No. However, I've been approved for the procedure and I'm waiting for the date to arrive 119 2.9
No. I am not sterilized and don't want to be 585 14.3
No. I want to be sterilized but I have started looking for a doctor (doctor shopping) 328 8.0
No. I want to be sterilized but I haven't started doctor shopping yet 1896 46.3
Yes. I am sterilized 479 11.7

Already Sterilized

479 sterilized childfree participants in total

Age when starting doctor shopping or addressing issue with doctor

Age group Participants # Percentage
18 or younger 37 7.7%
19 to 24 131 27.3%
25 to 29 159 33.2%
30 to 34 92 19.2%
35 to 39 47 9.8%
40 to 44 9 1.9%
45 to 49 1 0.2%
50 to 54 1 0.2%
55 or older 2 0.4%

Age at the time of sterilization

Age group Participants # Percentage
18 or younger 4 0.8%
19 to 24 83 17.3%
25 to 29 181 37.8%
30 to 34 121 25.3%
35 to 39 66 13.8%
40 to 44 17 3.5%
45 to 49 3 0.6%
50 to 54 1 0.2%
55 or older 3 0.6%

Elapsed time between requesting procedure and undergoing procedure

Time Participants # Percentage
Less than 3 months 280 58.5
Between 3 and 6 months 78 16.3
Between 6 and 9 months 20 4.2
Between 9 and 12 months 10 2.1
Between 12 and 18 months 17 3.5
Between 18 and 24 months 9 1.9
Between 24 and 30 months 6 1.3
Between 30 and 36 months 4 0.8
Between 3 and 5 years 19 4.0
Between 5 and 7 years 9 1.9
More than 7 years 27 5.6

How many doctors refused at first, before finding one who would accept?

Doctor # Participants # Percentage
None. The first doctor I asked said yes 340 71.0%
One. The second doctor I asked said yes 56 11.7%
Two. The third doctor I asked said yes 37 7.7%
Three. The fourth doctor I asked said yes 15 3.1%
Four. The fifth doctor I asked said yes 8 1.7%
Five. The sixth doctor I asked said yes 5 1.0%
Six. The seventh doctor I asked said yes 4 0.8%
Seven. The eighth doctor I asked said yes 1 0.2%
Eight. The ninth doctor I asked said yes 1 0.2%
I asked more than 10 doctors before finding one who said yes 12 2.5%

Approved, not Sterilized Yet

119 approved but not yet sterilised childfree participants in total. Owing to the zero participants who were approved but not yet sterilised in the 45+ age group in the 2018 survey, these categories were removed from the 2019 survey.

Age when starting doctor shopping or addressing issue with doctor

Age group Participants # Percentage
18 or younger 11 9.2%
19 to 24 42 35.3%
25 to 29 37 31.1%
30 to 34 23 19.3%
35 to 39 5 4.2%
40 to 45 1 0.8%

How many doctors refused at first, before finding one who would accept?

Doctor # Participants # Percentage
None. The first doctor I asked said yes 77 64.7%
One. The second doctor I asked said yes 12 10.1%
Two. The third doctor I asked said yes 12 10.1%
Three. The fourth doctor I asked said yes 5 4.2%
Four. The fifth doctor I asked said yes 2 1.7%
Five. The sixth doctor I asked said yes 4 3.4%
Six. The seventh doctor I asked said yes 1 0.8%
Seven. The eighth doctor I asked said yes 1 0.8%
Eight. The ninth doctor I asked said yes 0 0.0%
I asked more than ten doctors before finding one who said yes 5 4.2%

How long between starting doctor shopping and finding a doctor who said "Yes"?

Time Participants # Percentage
Less than 3 months 65 54.6%
3 to 6 months 13 10.9%
6 to 9 months 9 7.6%
9 to 12 months 1 0.8%
12 to 18 months 2 1.7%
18 to 24 months 2 1.7%
24 to 30 months 1 0.8%
30 to 36 months 1 0.8%
3 to 5 years 8 6.7%
5 to 7 years 6 5.0%
More than 7 years 11 9.2%

Age when receiving green light for sterilization procedure?

Age group Participants # Percentage
18 or younger 1 0.8%
19 to 24 36 30.3%
25 to 29 45 37.8%
30 to 34 27 22.7%
35 to 39 9 7.6%
40 to 44 1 0.8%

Not Sterilized Yet But Looking

328 searching childfree participants in total

How many doctors did you ask so far?

Doctor # Participants # Percentage
1 204 62.2%
2 61 18.6%
3 29 8.8%
4 12 3.7%
5 7 2.1%
6 6 1.8%
7 1 0.3%
8 1 0.3%
9 1 0.3%
More than 10 6 1.8%

How long have you been searching so far?

Time Participants # Percentage
Less than 3 months 117 35.7%
3 to 6 months 44 13.4%
6 to 9 months 14 4.3%
9 to 12 months 27 8.2%
12 to 18 months 18 5.5%
18 to 24 months 14 4.3%
24 to 30 months 17 5.2%
30 to 36 months 9 2.7%
3 to 5 years 35 10.7%
5 to 7 years 11 3.4%
More than 7 years 22 6.7%

At what age did you start searching?

Age group Participants # Percentage
18 or younger 50 15.2%
19 to 24 151 46.0%
25 to 29 86 26.2%
30 to 34 31 9.5%
35 to 39 7 2.1%
40 to 44 2 0.6%
45 to 54 1 0.3%

3.10 Childfreedom

4,094 childfree participants in total
Only 1.1% of the childfree participants (46 out of 4094) literally owns a jetski, but 46.1% of the childfree participants (1889 out of 4094) figuratively owns a jetski. A figurative jetski is an expensive material possession that purchasing would have been almost impossible had you had children.

Primary Reason to Not Have Children

Reason Participants # Percentage
Aversion towards children ("I don't like children") 1222 29.8
Childhood trauma 121 3.0
Current state of the world 87 2.1
Environmental (it includes overpopulation) 144 3.5
Eugenics ("I have "bad genes" ") 62 1.5
Financial 145 3.5
I already raised somebody else who isn't my child 45 1.1
Lack of interest towards parenthood ("I don't want to raise children") 1718 42.0
Maybe interested for parenthood, but not suited for parenthood 31 0.8
Medical ("I have a condition that makes conceiving/bearing/birthing children difficult, dangerous or lethal") 52 1.3
Other 58 1.4
Philosophical / Moral (e.g.: antinatalism) 136 3.3
Tokophobia (aversion/fear of pregnancy and/or chidlbirth) 273 6.7

4. Discussion

Section 1 : General Demographics

The demographics remain largely consistent with the 2018 survey. 85% of the participants are under 35, compared with 87.5% of the subreddit in the 2018 survey. 71.54% of the subreddit identify as female, compared with 70.4% in the 2018 survey. This is in contrast to the overall membership of Reddit, estimated at 74% male according to Reddit's Wikipedia page [https://en.wikipedia.org/wiki/Reddit#Users_and_moderators]. There was a marked drop in the ratio of members who identify as heterosexual, from 67.7% in the 2018 survey to 54.89% in the 2019 survey. Ethnicity wise, 77% of members identified as primarily Caucasian, a slight drop from the 2018 survey, where 79.6% of members identified as primarily Caucasian.
Further research may be useful to explore the unusually high female membership of /childfree and the potential reasons for this. It is possible that the results are skewed towards those more inclined to complete a survey.
In the 2018 survey the userbase identified the following missing ethicities:
This has been rectified in the current 2019 survey.

Section 2 : Education level

As it did in the 2018 survey, this section highlights the stereotype of childfree people as being well educated. 4% of participants did not complete high school, which is a slight increase from the 2018 survey, where 3.1% of participants did not graduate high school. This could potentially be explained by the slightly higher percentage of participants under 18. 5.6% of participants were under 18 at the time of the 2018 survey, and 8.2% of participants were under 18 at the time of the 2019 survey.
At the 2019 survey, the highest percentage of responses under the: What is your degree/major? question fell under "I don't have a degree or a major" (16.9%) and "other" (9.71%). However, of the participants who were able to select a degree and/or major, the most popular responses were:
Response Participants # Percentage
Health Sciences 498 8.33%
Engineering 455 7.61%
Information and Communication Technologies 428 7.16%
Arts and Music 403 6.74%
Social Sciences 361 6.04%
Compared to the 2018 survey, health sciences have overtaken engineering, however the top 5 majors remain the same. There is significant diversity in the subreddit with regards to chosen degree/major.

Section 3 : Career and Finances

The highest percentage of participants (17.7%) listed themselves as a student. However, of those currently working, significant diversity in chosen field of employment was noted. This is consistent with the 2018 survey. The highest percentage of people working in one of the fields listed remains in Healthcare and Social Services. This is slightly down from the 2018 survey (9.9%) to 9.5%.
One of the stereotypes of the childfree is of wealth. However this is not demonstrated in the survey results. 72.4% of participants earn under $60,000 USD per annum, while 87.5% earn under $90,000 per annum. 26.2% are earning under $15,000 per annum. The results remain largely consistent with the 2018 survey. 1127 participants, or 19% chose not to disclose this information. It is possible that this may have skewed the results if a significant proportion of these people were our high income earners, but impossible to explore.
A majority of our participants work between 30 and 50 hours per week (71.2%) which is markedly increased from the 2018 survey, where 54.6% of participants worked between 30 and 50 hours per week.

Section 4 : Child Status

This section solely existed to sift the childfree from the fencesitters and the non childfree in order to get answers only from the childfree. Childfree, as it is defined in the subreddit, is "I do not have children nor want to have them in any capacity (biological, adopted, fostered, step- or other) at any point in the future." 68.5% of participants actually identify as childfree, slightly up from the 2018 survey, where 66.3% of participants identified as childfree. This is suprising in reflection of the overall reputation of the subreddit across reddit, where the subreddit is often described as an "echo chamber".

Section 5 : Current Location

The location responses are largely similar to the 2018 survey with a majority of participants living in a suburban and urban area. 86.7% of participants in the 2019 survey live in urban and suburban regions, with 87.6% of participants living in urban and suburban regions in the 2018 survey. There is likely a multifactorial reason for this, encompassing the younger, educated skew of participants and the easier access to universities and employment, and the fact that a majority of the population worldwide localises to urban centres. There may be an element of increased progressive social viewpoints and identities in urban regions, however this would need to be explored further from a sociological perspective to draw any definitive conclusions.
A majority of our participants (60.9%) live in the USA. The United Kingdom (8.1%), Canada (7.9%), Australia (3.6%) and Germany (2.2%) encompass the next 4 most popular responses. Compared to the 2018 survey, there has been a slight drop in the USA membership (64%), United Kingdom membership (7.3%) Canadian membership (8.1%), Australian membership (3.8%). There has been a slight increase in German membership, up from 1.7%. This may reflect a growing globalisation of the childfree concept.

Section 6 : Religion and Spirituality

A majority of participants were raised Christian (64.1%) however the majority are currently aetheist (55.6%) or agnostic (20.25%). This is consistent with the 2018 survey results.
A majority of participants (62.8%) rated religion as "not at all influential" to the childfree choice. This is consistent with the 2018 survey where 60.9% rated religion as "not at all influential". Despite the high percentage of participants who identify as aetheist or agnostic, this does not appear to be related to or have an impact on the childfree choice.

Section 7 : Romantic and Sexual Life

60.7% of our participants are in a relationship at the time of the survey. This is an almost identical result to the 2018 survey, where 60.6% of our participants were in a relationship. A notable proportion of our participants are listed as single and not looking (23.8%) which is consistent with the 2018 survey. Considering the frequent posts seeking dating advice as a childfree person, it is surprising that such a high proportion of the participants are not actively seeking out a relationship.
Participants that practice ethical non-monogamy are unusual (17.7%) and this result is consistent with the results of the 2018 survey. Despite the reputuation for childfree people to live an unconventional lifestyle, this finding suggests that a majority of our participants are monogamous.
84.2% of participants with partners of some kind have at least one childfree partner. This is consistent with the often irreconcilable element of one party desiring children and the other wishing to abstain from having children.

Section 8 : Childhood and Family Life

Overall, the participants skew towards a happier childhood.

Section 9 : Sterilization

While just under half of our participants wish to be sterilised, 46.3%, only 11.7% have been successful in achieving sterilisation. This is likely due to overarching resistance from the medical profession however other factors such as the logistical elements of surgery and the cost may also contribute. This is also a decrease from the percentage of participants sterilised in the 2018 survey (14.8%). 31.1% of participants do not wish to be or need to be sterilised suggesting a partial element of satisfaction from temporary birth control methods or non-necessity from no sexual activity.
Of the participants who did achieve sterilisation, a majority began the search between 19 and 29, with the highest proportion being in the 25-29 age group (33.2%) This is a drop from the 2018 survey where 37.9% of people who started the search were between 25-29.
The majority of participants who sought out and were successful at achieving sterilisation, were again in the 25-29 age group (37.8%). This is consistent with the 2018 survey results.
Over half of the participants who were sterilised had the procedure completed in less than 3 months (58.5%). This is a decline from the number of participants who achieved sterilisation in 3 months in the 2018 survey (68%). The proportion of participants who have had one or more doctors refuse to perform the procedure has stayed consistent between the two surveys.

Section 10 : Childfreedom

The main reasons for people chosing the childfree lifestyle are a lack of interest towards parenthood and an aversion towards children. Of the people surveyed 63.8% are pet owners, suggesting that this lack of interest towards parenthood does not necessarily mean a lack of interest in all forms of caretaking. The community skews towards a dislike of children overall which correlates well with the 81.4% of users choosing "no, I do not have, did not use to have and will not have a job that makes me heavily interact with children on a daily basis" in answer to, "do you have a job that heavily makes you interact with children on a daily basis?".
A vast majority of the subreddit identifes as pro-choice (94.5%). This is likely due to a high level of concern about bodily autonomy and forced parenthood. However only 70% support financial abortion for the non-pregnant person in a relationship to sever all financial and parental ties with a child.
45.9% identify as feminist, however many users prefer to identify with egalitarianism or are unsure. Only 8% firmly do not identify as a feminist.
Most of our users realised that did not want children young. 60% of participants knew they did not want children by the age of 18, with 96% of users realising this by age 30. This correlates well with the age distribution of participants. Despite this early realisation of our childfree stance, 80.4% of participants have been "bingoed" at some stage in their lives. Only 13% of participants are opposed to parents making posts on this subreddit.
Bonus section: The Subreddit
In light of the "State of the Subreddit" survey from 2018, some of the questions from this survey were added to the current Subreddit Survey 2019.
By and large our participants were lurkers (66.17%). Our participants were divided on their favourite flairs with 33.34% selecting "I have no favourite". The next most favourite flair was "Rant", at 20.47%. Our participants were similarly divided on their least favourite flair, with 64.46% selecting "I have no least favourite". Potentially concerningly were the 42.01% of participants who selected "I have never participated on this sub", suggesting a disparity between members who contributed to this survey and members who actually participate in the subreddit. To further address this, next year's survey will clarify the "never participated" option by specifying that "never participated" means "never up/downvoting, reading posts or commenting" in addition to never posting.
A small minority of the survey participants (6.18%) selected "yes" to allowing polite, well meaning lectures. An even smaller minority (2.76%) selected "yes" to allowing angry, trolling lectures. In response to this lectures remain not tolerated, and removed on sight or on report.
Almost half of our users (49.95%) support the use of terms such as breeder, mombie/moo, daddict/duh on the subreddit, with a further 22.52% supporting use of these terms in context of bad parents only. In response to this use of the above and similar terms to describe parents remains permitted on ths subreddit.
55.3% of users support the use of terms to describe children such as crotchfruit on the subreddit, with a further 17.42% of users supporting the use of this and similar terms in context of bad children only. In response to this use of the above and similar terms to describe children remains permitted on ths subreddit.
56.03% of participants support allowing parents to post, with a further 28.77% supporting parent posts dependent on context. In response to this, parent posts will continue to be allowed on the subreddit. Furthermore 66.19% of participants support parents and non childfree making "I need your advice" posts, with a further 21.37% supporting these dependent on context. In light of these results we have decided to implement a new "regret" flair to better sort out parents from fencesitters, which will be trialed until the next subreddit survey due to concern from some of our members. 64.92% of participants support parents making "I support you guys" posts. Therefore, these will continue to be allowed.
71.03% of participants support under 18's who are childfree participating in the subreddit. Therefore we will continue to allow under 18's that stay within the overall Reddit age requirement.
We asked participants their opinion on moving Rants and Brants to a stickied weekly thread. Slightly less than half (49.73%) selected leaving them as they are in their own posts. In light of the fact that Rants are one of the participant's favourite flairs, we will leave them as they are.
There was divide among participants as to whether "newbie" questions should be removed. An even spread was noted among participants who selected remove and those who selected to leave them as is. We have therefore decided to leave them as is.

5. Conclusion

Thank you to our participants who contributed to the survey. To whoever commented, "Do I get a donut?", no you do not, but you get our appreciation for pushing through all of the questions!
Overall there have been few significant changes in the community from 2018.

Thank you also for all of your patience!

submitted by CFmoderator to childfree [link] [comments]

| Getting started with BSPWM for beginners! [Polybar][Powerline][Picom][Pywal]

A while back I made a post on getting started with BSPWM (Binary Space Partition Window Manager) on this subreddit; I plan on deleting that and using this guide as the go-to for it. I was really all over the place, and at the time there wasn't really a lot of information on the tiling window manager so there were a lot of mistakes on it and things I could have done better. Now that I've grown more experienced throughout the years with Linux in general, I feel like I've perfected the art of ricing with BSPWM and Polybar together. And I'm here to show you how it's done.
A couple of comments before we begin, I'm going to assume you have experience with the following:
And I'm going to tell you that although you can replace your overall desktop environment with a tiling window manager, I'm really hoping that you have an open mind for keeping desktop environment in your system because tiling window managers tend to become more of a general struggle to deal with if you lack a solid background in Bash scripting. However, lucky for you in this tutorial I will not be using any bash scripting. The main idea here is a tiling window manager (aka Tiling WM) is not a desktop environment (aka DE), please research the difference between the two.
[Part 1: Installing BSPWM and Polybar]
Technically speaking you can install any tiling window manager on any distribution. However I'm going to split the line here between Debian (mostly Ubuntu) and Arch (I'm going to ignore Solus, Gentoo, and other Linux OS with unique file systems). If you're on Ubuntu you can install BSPWM without issues by simply running:
sudo apt install bspwm
However your efforts for viability in using the Polybar status bar ends there as you will have to install the extra dependencies to get Polybar to work, and even after installing the dependencies you have to reconfigure the cmake file to recognize where to find the siji font you have to install. Luckily for you if you know bash scripting really well and know how to for example pull out the clock configuration and print it into a UI, then you can use the default status bar bspwm installs called lemonbar which you can find out more of here: https://github.com/LemonBoy/bar
But if you are like me and don't want to learn Bash scripting, and you want to hop right into Polybar without issues, then Arch Linux is the operating system for you. I'm going to assume you know how to install it, if you don't it's alright I don't either, which is why I use anarchy to install it; it's an iso that has a cli interface to help you install Arch into your system https://www.anarchylinux.org/
In this tutorial I will be using Arch Linux as my OS and Gnome as my desktop environment of choice. It's one of the best desktop environments out there, and easy to apply themes to. Configure your desktop of choice how you like it, rice it up even if you wish to do so.
In Arch Linux packages aren't located in one place like they are in Ubuntu, instead you have a core set of packages the Arch Linux organization caters, and the default manager for packages is called pacman ; then you have a collection of extra packages maintained by users who lovingly love Arch's simplicity called the Arch User Repository (AUR), and to get a package from the AUR you need to use a community package manager. I do not recommend using any AUR package manager (aka helper) mentioned on the web instead use ones from this list that comes from the official Arch Linux organization: https://wiki.archlinux.org/index.php/AUR_helpers
I'm going to be using pikaur for this tutorial, to get it simply follow the instructions here: https://github.com/actionless/pikaur#installation and you'll be set.
A note on using your community package helper and pacman: you want to have the mindset that if something can be gotten from pacman, that you'll get it from pacman because pacman uses sudo priveleges; meaning that the maintainers of the software are telling you that you can trust a certain package and it's because it will be installed within your root folders. Community packages can contain malware; and by some god given miracle some bastard has written malware, it will have a tough time escalating privileges because community packages are installed on your home directory. Believe me I've genuinely tried this and it's hard to do; it ain't easy to do for hackers.
Now lets assume I'm starting from my gnome desktop, to install BSPWM on Arch, and while were at it lets install the other packages (note that one is a font) were going to focus on, simply run:
sudo pacman -S bspwm sxhkd picom ttf-font-awesome rxvt-unicode dmenu powerline python-pip feh neofetch zsh-theme-powerlevel9k lxappearance zsh rofi scrot
and while were at it lets install Polybar and the extra community packages (note that one is a font):
pikaur -S polybar nerd-fonts-complete cava bash-pipes cmatrix
Follow the prompts for each and install them. Note nerd fonts takes an incredibly long time to install, this is normal, you'll see pikaur stall at "compressing package" don't freak out!
Were also going to use pywal from dylanarlaps (https://github.com/dylanaraps/pywal), please donate to him, he's done incredible work in creating this amazing tool were going to use:
sudo pip3 install pywal
All of these software have githubs to them, feel free to google search for them and skim their wikis!
I also use zsh by default even though I'm not a mac user, but only real hacktivists use Oh My ZSH!
https://ohmyz.sh/
run the little curl command they got there, and you'll be part of the cool kids club!
At this point you might be tempted to switch to BSPWM and get started, but you'll meet with the impasse of being unable to do anything, even log out of the session. To prevent this, you need to understand how BSPWM works. To start off, you first need to navigate to a hidden folder called .config in your home directory. In here you need to create two folders, one named bspwmand the other sxhkd, and within them you're going to create two empty files called bspwmrcin the bspwm folder and sxhkdrc in the sxhkd folder. The rc files (running configuration) are responsible for handling the behavior of the window manager (bspwmrc does this) and the keystrokes (sxhkdrc does this). I'm going to give you the default content Baskerville created in his github (https://github.com/baskerville/bspwm) for BSPWM below, later we are going to modify this for some extra functionality, so for now just copy and paste these into the files you created:
bspwmrc: https://raw.githubusercontent.com/baskerville/bspwm/masteexamples/bspwmrc
sxhkdrc:https://raw.githubusercontent.com/baskerville/bspwm/masteexamples/sxhkdrc
And the last thing you want to do is make bspwmrc an executable, simply navigate to the file, right click it on your file manager, select properties>permissions, and tick the box to allow the file to be run as an executable. For sxhkdrc I won't be using urxvt, although I will give you the Xresources I created for it a long time ago, instead I'm going to use the gnome terminal to keep things easier. If you want to use the gnome terminal, simply replace urxvt with gnome-terminal in the sxhkdrc file.
Once you're done with this, log out and change your environment to BSPWM, to open a terminal press super+enter where super is your windows or mac key on your keyboard to bring up a terminal. To change your workspace press Super+2, and to open firefox, press super+space to use dmenu to search for it.
The way BSPWM works is through a socket-client model in which the handler (bspc) connects to a socket created by bspwm. You don't need to know too much about this in relation to this guide, but the config file I provide will get you started on how to setup commands for bspc. For now I want you to focus on that sxhkdrc is where you set your keybinds, sxhkd is the program that handles those keybinds, and bspc tells bspwm how to handle its backend. Consult the manual for BSPWM using man bspwm for more info.
[Part 2: Ricing and Modding BSPWM]
To start off I want you to select a background of your choice, and I want you to choose a background that doesn't just have two or three colors, but a mesh of beautiful colors, the more colors used the better. This background will model all of the colors used in your window borders and terminal through the use of a program called pywal: https://github.com/dylanaraps/pywal
Now before going any further, I highly recommend that if you ever get stuck on any of this, that you go into the github pages of these packages and consult their READMEs and wikis, because I wont be there to hold your hand unless I feel like it. However to satisfy your inner demon I'll be sure to supply you with as much information as I possibly can and split this by sections to build the killer desktop you crave. As a reference you can always refer to my dotfiles here: https://bitbucket.org/Volteos/linux-dot-files/src/maste ; I'll probably have made some changes here and there, but nothing major since the inception of this guide.
What I will NOT be dealing with is URxvt. Although the terminal seems to be the weapon of choice for BSPWM users I like my comfy Gnome Terminal, and to be fair, you can always pick the one you like; as far as this goes, any terminal will work with pywal because what it's actually dependent on is the zsh running config or .zshrc file hiding in your home directory. Oh and one last thing I had you install a program called dmenu, which you can use to bring up programs. Here are some basic keybinds to help you run stuff you need:
So assuming you've managed to install Oh My Zsh, and installed pywal like I told you to, and you have chosen your wallpaper you simply need to navigate to your bashrc file and add my stuff to it. Don't panic, really try to read my comments follows with (#) :
#set your wallpaper upon logging in &
feh --bg-fill $HOME/Path/to/youpicture &
#This invokes pywal with your image simply replace the path
wal -i $HOME/Path/to/youpicture &
#source the colors located within a shell script from your cache (you don't need to touch this).
. "${HOME}/.cache/wal/colors.sh"
#Set the border colors for your windows for focused, active and inactive ones.
bspc config normal_border_color "$color1"
bspc config active_border_color "$color2"
bspc config focused_border_color "$color15"
#Use the line below if you are on bspwm >= 0.9.4
bspc config presel_feedback_color "$color1"
#Use the line below if you are on bspwm < 0.9.4
#bspc config presel_border_color "$color1"
#place the focus on where the mouse is; if you like clicking windows to focus, comment this line
bspc config focus_follows_pointer true
After placing this in your bspwmrc file log out and log back in and you'll see the borders have adapted the color of the wallpaper behind it when you open your terminal. Neat right? But you might be asking, why doesn't the terminal take any colors? And the answer is in the shell it's using; remember that hidden file .zshrc in your home directory that you can't see if you don't have a show hidden files checkbox clicked on your file manager? open it, and at the very bottom of it, add this line:
wal -i $HOME/Path/to/youpicture
Now zsh is set to run pywal every time you open it. So now upon re-opening your terminal, you should see that the terminal has now taken the colors of your wallpaper. Feel free to adjust and modify these settings as you see fit. Change the colors, do as you please, as an added bonus to my setup I adjusted the gaps between my windows to be 25 pixels apart, like so:
#Define window settings
bspc config border_width 2
bspc config window_gap 25
bspc config split_ratio 0.52
bspc config borderless_monocle true
bspc config gapless_monocle true
If and only if you have more than one monitor like I do, simply adjust your bspc monitor line to look like so:
#Define Workspace Rules
bspc monitor HDMI-1 -d Terminal Sublime Firefox
bspc monitor DVI-D-1 -d ws4 ws5
#These options for follow and focus put you on the workspace these programs start on; the -a = activate
bspc rule -a Gnome-terminal desktop='^1' follow=on focus=on
bspc rule -a Sublime_text desktop='^2' follow=on focus=on
bspc rule -a firefox desktop='^3' follow=on focus=on
bspc rule -a ws4 desktop='^4' follow=on
bspc rule -a ws5 desktop='^5' follow=on
And replace the desktops with the appropriate names, which you can find by simply running xrandrin your terminal. Again it doesn't have to be copy and paste what I have you can always replace the programs and workspace configuration with your own to your liking.
[Part 3: Pimping Polybar]
At this point you must feel all proud of your new little setup, but you can't be satisfied until you've got some method of looking at what the time is, or what workspace your on, or even better, a way to turn of your computer.
That's where Polybar comes in, and now all you have to do is go to the github page for Polybar, and look through the wiki to find what you need. I've taken the liberty of copy and pasting every module I wanted; and put it all into one nice neat config file you can refer to. I don't feel like explaining how Polybar works as the wiki is more than acceptable.
https://bitbucket.org/Volteos/linux-dot-files/raw/ee4519ce7b62f56af42c127024a4dadece3d0e51/bspwm-config/polybaconfig
Here's my file in raw format, you can copy and paste it, but there are certain parts on it you need to modify to make it work on your pc. So the first parts are within the first set of parameters under "Bar Module"; upon skimming carefully you'll notice that I've set up two bars named future1 and future2, and within them I've placed the respective monitors I want them on.
You'll also notice I've set some lines to set the fonts for them; now I use a font called font awesome to grab icons for the bar from:
https://fontawesome.com/
within these lines:
;Define fonts to be used, check fc-list to see all the ones you have
font-0 = "Unifont:size=12:weight=bold;"
font-1 = "Font Awesome 5 Free,Font Awesome 5 Free Solid: style=Solid: size=12;"
font-2 = "Font Awesome 5 Free,Font Awesome 5 Free Regular: style=Regular: size=12"
font-3 = "Font Awesome 5 Brands,Font Awesome 5 Brands Regular:style=Regular"
I mention this and even put a comment on it to remind you of where and what to edit in the event that the creators of Font Awesome come out with a Font Awesome 6 and suddenly your icons on Polybar break. I once fell victim to this when Font Awesome 4 got released and it gave me a lot of frustration, so here I am saving you a massive headache should you choose to update your machine. So when Font Awesome 6 comes out change the 5 in Font Awesome 5 to a 6 and things should be okay again.
The rest of my file is pretty much ripped off straight from the wiki, so please consult each section as needed.
Alas to finally get Polybar to work you need to add it as a startup program in your bspwmrc file; in my case the lines would be:
polybar future1 &
polybar future2 &
because I named my bars future1 and future2.
My colors parameters section is ripped straight from from the pywal wiki here:https://github.com/dylanaraps/pywal/wiki/Customization . Just click on the Polybar Title and you'll see exactly what I put in there. The only thing is I added my own version of the background color because Pywal doesn't generate transparency in its code; only 6 Hex color codes, not the extra (AA) I added for transparency, I've also colored it dark purple.
[Part 3: Going blind the right way with Picom]
In the land before this guide was created, we used something called Compton to handle all of our compositor needs. If you don't know what a compositor does, it's a tool that lets you define shadows and transparency for your windows, and what I've done, which has viciously taken me 6 hours to achieve through trail and error, I am simply going to explain the config the best way I possibly can and give it to you. What I've managed to achieve is a subversive blur effect in addition to transparency, it's something you don't normally see in Unixporn configs, nor in desktop managers that use compton by default.
Here it is: https://bitbucket.org/Volteos/linux-dot-files/raw/ee4519ce7b62f56af42c127024a4dadece3d0e51/bspwm-config/picom/picom.conf
This was originally created by code_nomad and is a file ripped straight from the official Arch Linux website. Here's the original: https://git.archlinux.org/svntogit/community.git/tree/trunk/compton.conf?h=packages/compton#n80
And to this day I still don't know what everything on it, but I've made educated guesses, and will try and explain it from my perspective. Note that at the time of writing this Picom has only its terminal manual to explain things man picom, so I'm doing you a favor here. To get Picom going you need to add it as a startup program to your bspwmrc file:
#please replace accordingly
picom --config $HOME/path/to/youcreated/picom.conf/file &
The first and obvious mods I made are for the shadows, all I did is reset their offsets to 0 and set the opacity to 1 for them so you can clearly see them when you start picom. I did not touch the excluded shadows section.
The only section I truly played around with is the Opacity section. The first group of settings speak for themselves as they're pretty self explanatory (I'm ignoring the override I have no idea what that does). The opacity rules is the meat of this config file. The way it works is each window has a property to it internally that has a class name to it. Each rule on the list is defined as PERCENTOPAQUE:RULE. It's best to take an example, so let me use this one to start off with:
"99:class_g = 'firefox' && focused",
So what this rule does is set the opacity of my window with window class 'firefox' to 99 if I am focused on it. If I am not focused it will revert to the inactive opacity setting of 0.5 that I have. The class names are very specific to the program you're working with, sometimes, simply supplying the class name wont work because the specified window doesn't have a WM_OPACITY property set on it; so you're left to use just the class name on it like I did with sublime so that it matches the class to anything resembling the name of the program (that's what I was told the ? is for):
"99:class_g ?= 'sublime_text' && focused",
In order to find the proper class names you have to use a program called xprop (I'll let you figure out how to use this), the class name will be within WM_CLASS(STRING) = "some name here". As a general rule of thumb, for any program you use first try and see if using just the "=" works, and if it doesn't then just use the "?=". In the examples above if I don't want the opacity to change on focus, then just remove the && focusedlike I did with Rofi.
Blurring is a whole other concept I still don't fully understand however I played around with my settings and use a 7x7box kernel setting. If it lags for you, you can always try the 3x3box or the 5x5box kernel. You can also use the one in the original example with the crazy list of numbers, and just play around with it. I leave you to trial and error everything regarding blurring. I've chatted with some people on Unixporn about this, and I came across a neat little program called kawase, but according to Yshui, the maintainer of Picom, lack of manpower makes its integration hard, so if you're balsy enough to tackle this mountain, by all means help this person https://github.com/yshui/picom/issues/32 .
[Part 4: URxvt Lovers (if you're not using URxvt skip this)]
I don't mess around with this too much, here's my old .Xresources file, it includes some settings for Rofi, which I will cover later:
https://pastebin.com/K6JvVfVV
but it should work fine as long as you have Adobe source code pro fonts installed into your system. Here's the package index for the font in case if you don't have it: https://www.archlinux.org/packages/extra/any/adobe-source-code-pro-fonts/
Simply place that file in your home directory and you should be okay.
[Part 5: Fast Execution with Rofi]
Rofi is a neat little tool used to replace dmenu I recommend trying it out on your terminal just to get the feel for it. All I'm doing is applying the pywal instructions to play here, so here you go:
Original Instructions:
https://github.com/dylanaraps/pywal/wiki/Customization#rofi
Just follow steps 1, 2, and 3 on this:
https://github.com/dylanaraps/pywal/wiki/User-Template-Files
your end file for config.rasi should look like so:
configuration {
theme: "~/.cache/wal/colors-rofi-dark.rasi";
}
Be sure to replace your keybind dmenu for sxhkdrc for rofi, your keybind should look like so:
#program launcher
super + @space
rofi -show run
[Part 6: Setting the themes and default cursor]
If you're on Unixporn you probably already know how to setup User themes from source by putting them in your home directory so I wont explain that. However I will tell you that you need to use lxappearance to set the icons and theme. It's pretty self explanatory once you actually open lxappearance and play around with it.
The cursor however isn't permanent, at least in my case it wasn't, and luckily for you I found the solution. To set the default cursor:
1 - copy cursor theme to /usshare/icons
2 - change the default Inherits value to theme name as shown in lxappearance inside this file: /usshare/icons/default/index.theme
and you should be set. [There is a bug that changes the cursor when focusing on windows that aren't related to lxde, as soon as I figure out how to fix that I'll add that onto here].
[Part 7: POWUHLEVEL9000 (powerline ricing)]
Ricing Powerline has been a massive headache for me. However everything is done within the .zshrc file. I'll just give you what I have and the beefy github wiki created for it (https://github.com/Powerlevel9k/powerlevel9k/wiki). It uses the entire nerdfonts collection https://www.nerdfonts.com/ which is why it took so long to install, so for all intents and purposes, if you can change my zshrc file to your liking then by all means do so (https://bitbucket.org/Volteos/linux-dot-files/raw/ee4519ce7b62f56af42c127024a4dadece3d0e51/bspwm-config/.zshrc):
neofetch --ascii $HOME/path/to/some/file/with/ascii/art
wal -i $HOME/Path/to/youpicture -q
POWERLEVEL9K_MODE='nerdfont-complete'
POWERLEVEL9k_OS_ICON=$'\uF303'
POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(os_icon context status dir vcs) POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(status)
plugins=(git)
source /usshare/zsh-theme-powerlevel9k/powerlevel9k.zsh-theme
I've muted neofetch and pywal, I won't go into too much detail about neofetch only that I've muted it and used ascii art instead of an image. If you want to know more about neofetch this is your friend: https://github.com/dylanaraps/neofetch .
[Part 7: GODLEVEL10000 (Powerlevel10k) ]
I decided to add this as part of this guide, Powerlevel10k acts as a fork to Powerlevel9k that was introduced in March 2019, in which it absolutely speaks for itself. If you would love to try it out check out the github for it! https://github.com/romkatv/powerlevel10k/ I'll show you how to get started on it, I recommend starting off with migrating from Powerlevel9k. Assuming you have installed the nerd fonts and everything else, you should be good to go!
Start off by installing it from your AUR helper:
pikaur -S zsh-theme-powerlevel10k-git
Then simply run:
sudo git clone --depth=1 https://github.com/romkatv/powerlevel10k.git $ZSH_CUSTOM/themes/powerlevel10k
sed 's/powerlevel9k/powerlevel10k/g' -i ~/.zshrc
exec zsh
p10k configure
Follow the prompt and enjoy your now god level powerline config!
[The End]
This pretty much covers everything I hope to see some pretty gnarly configs down the line BSPWM is really on the rise and I think it's a much easier alternative to work with than i3, I love it so far, and hope its users come to love it as much as I do too someday!
submitted by Volteos to unixporn [link] [comments]

Comprehensive Guide for getting into Home Recording

I'm going to borrow from a few sources and do my best to make this cohesive, but this question comes up a lot. I thought we had a comprehensive guide, but it doesn't appear so. In the absence of this, I feel that a lot of you could use a simple place to go for some basics on recording. There are a couple of great resources online already on some drumming forums, but I don't think they will be around forever.
Some background on myself - I have been drumming a long time. During that time, home recording has gone from using a cassette deck to having a full blown studio at your finger tips. The technology in the last 15 years has gotten so good it really is incredible. When I was trying to decide what I wanted to do with my life, I decided to go to school for audio engineering in a world-class studio. During this time I had access to the studio and was able to assist with engineering on several projects. This was awesome, and I came out with a working knowledge of SIGNAL CHAIN, how audio works in the digital realm, how microphones work, studio design, etc. Can I answer your questions? Yes.

First up: Signal Chain! This is the basic building block of recording. Ever seen a "I have this plugged in but am getting no sound!" thread? Yeah, signal chain.

A "Signal Chain" is the path your audio follows, from sound source, to the recording device, and back out of your monitors (speakers to you normies).
A typical complete signal chain might go something like this:
1] instrument/sound source 2] Microphone/TransducePickup 3] Cable 4] Mic Preamp/DI Box 5] Analog-to-Digital Converter 6] Digital transmission medium[digital data get recoded for usb or FW transfer] 7] Digital recording Device 8] DSP and Digital summing/playback engine 9] Digital-to-Analog Converter 10] Analog output stage[line outputs and output gain/volume control] 11] Monitors/Playback device[headphones/other transducers]
Important Terms, Definitions, and explanations (this will be where the "core" information is):
1] AD Conversion: the process by which the electrical signal is "converted" to a stream of digital code[binary, 1 and 0]. This is accomplished, basically, by taking digital pictures of the audio...and this is known as the "sampling rate/frequency" The number of "pictures" determines the frequency. So the CD standard of 44.1k is 44,100 "pictures" per second of digital code that represents the electrical "wave" of audio. It should be noted that in order to reproduce a frequency accuratly, the sampling rate must be TWICE that of the desired frequency (See: Nyquist-Shannon Theorem). So, a 44.1 digital audio device can, in fact, only record frequencies as high as 22.05khz, and in the real world, the actual upper frequency limit is lower, because the AD device employs a LOW-PASS filter to protect the circuitry from distortion and digital errors called "ALIASING." Confused yet? Don't worry, there's more... We haven't even talked about Bit depth! There are 2 settings for recording digitally: Sample Rate and Bit Depth. Sample rate, as stated above, determines the frequencies captured, however bit depth is used to get a better picture of the sample. Higher bit depth = more accurate sound wave representation. More on this here. Generally speaking, I record at 92KHz/24 bit depth. This makes huge files, but gets really accurate audio. Why does it make huge files? Well, if you are sampling 92,000 times per second, you are taking each sample and applying 24 bits to that, multiply it out and you get 92,000*24 = 2,208,000 bits per second or roughly 0.26MB per second for ONE TRACK. If that track is 5 minutes long, that is a file that is 78.96MB in size. Now lets say you used 8 inputs on an interface, that is, in total, 631.7MB of data. Wow, that escalates quick, right? There is something else to note as well here: Your CPU has to calculate this. So the amount of calculations it needs to perform for this same scenario is ~17.7 million calculations PER SECOND. This is why CPU speed and RAM is super important when recording digitally.
2] DA conversion: the process by which the digital code (the computer representation of a sound wave) is transformed back into electrcal energy in the proper shape. In a oversimplified explanation, the code is measured and the output of the convertor reflects the value of the code by changing voltage. Think of a sound wave on a grid: Frequency would represent the X axis (the horizontal axis)... but there is a vertical axis too. This is called AMPLITUDE or how much energy the wave is generating. People refer to this as how 'loud' a sound is, but that's not entirely correct. You can have a high amplitude wave that is played at a quiet volume. It's important to distinguish the two. How loud a sound is can be controlled by the volume on a speaker or transducer. But that has no impact on how much amplitude the sound wave has in the digital space or "in the wire" on its way to the transducer. So don't get hung up on how "loud" a waveform is, it is how much amplitude it has when talking about it "in the box" or before it gets to the speakeheadphone/whatever.
3] Cables: An often overlooked expense and tool, cables can in fact, make or break your recording. The multitudes of types of cable are determined by the connector, the gauge(thickness), shielding, type of conductor, etc... Just some bullet points on cables:
- Always get the highest quality cabling you can afford. Low quality cables often employ shielding that doesnt efectively protect against AC hums(60 cycle hum), RF interference (causing your cable to act as a gigantic AM/CB radio antenna), or grounding noise introduced by other components in your system. - The way cables are coiled and treated can determine their lifespan and effectiveness. A kinked cable can mean a broken shield, again, causing noise problems. - The standard in the USA for wiring an XLR(standard microphone) cable is: PIN 1= Cold/-, PIN 2= Hot/+, PIN 3=Ground/shield. Pin 3 carries phantom power, so it is important that the shield of your cables be intact and in good condition if you want to use your mic cables without any problems. - Cables for LINE LEVEL and HI-Z(instrument level) gear are not the same! - Line Level Gear, weather professional or consumer, should generally be used with balanced cables (on a 1/4" connector, it will have 3 sections and is commonly known as TRS -or- TipRingSleeve). A balanced 1/4" is essentially the same as a microphone cable, and in fact, most Professional gear with balanced line inputs and outputs will have XLR connectors instead of 1/4" connectors. - Hi-Z cable for instruments (guitars, basses, keyboards, or anything with a pickup) is UNBALANCED, and should be so. The introduction of a balanced cable can cause electricity to be sent backwards into a guitar and shock the guitar player. You may want this to happen, but your gear doesn't. There is some danger here as well, especially on stage, where the voltage CAN BE LETHAL. When running a guitabass/keyboard "Direct" into your interface, soundcard, or recording device, you should ALWAYS use a "DIRECT BOX", which uses a transformer to isolate and balance the the signal or you can use any input on the interface designated as a "Instrument" or "Hi-Z" input. It also changes some electrical properties, resulting in a LINE LEVEL output (it amplifies it from instrument level to line level).
4] Digital Data Transmissions: This includes S/PDIF, AES/EBU, ADAT, MADI. I'm gonna give a brief overview of this stuff, since its unlikely that alot of you will ever really have to think about it: - SDPIF= Sony Phillips Digital Interface Format. using RCA or TOSLINK connectors, this is a digital protocol that carries 3 streams of information. Digital audio Left, Digital Audio Right, and CLOCK. SPDIF generally supports 48khz/20bit information, though some modern devices can support up to 24bits, and up to 88.2khz. SPDIF is the consumer format of AES/EBU - AES/EBU= Audio Engineering Society/European Breadcasters Union Digital protocol uses a special type of cable often terminated with XLR connectors to transmit 2 channels of Digital Audio. AES/EBU is found mostly on expensive professional digital gear. - ADAT= the Alesis Digital Audio Tape was introduced in 1991, and was the first casette based system capable of recording 8 channels of digital audio onto a single cartridge(a SUPER-VHS tape, same one used by high quality VCR's). Enough of the history, its not so important because we are talking about ADAT-LIGHTPIPE Protocol, which is a digital transmission protocol that uses fiberoptic cable and devices to send up to 8 channels of digital audio simultaneously and in sync. ADAT-Lightpipe supports up to 48khz sample rates. This is how people expand the number of inputs by chaining interfaces. - MADI is something you will almost never encounter. It is a protocol that allows up to 64 channels of digital audio to be transmitted over a single cable that is terminated by BNC connectors. Im just telling you it exists so in case you ever encounter a digital snake that doesnt use Gigabit Ethernet, you will know whats going on.
digital transmission specs: SPDIF -> clock->2Ch->RCA cable(consumer) ADAT-Lightpipe->clock->8Ch->Toslink(semi-pro) SPDIF-OPTICAL->clock->2Ch->Toslink(consumer) AES/EBU->clock->2Ch->XLR(Pro) TDIF->clock->8Ch->DSub(Semi-Pro) ______________ MADI->no clock->64Ch->BNC{rare except in large scale pofessional apps} SDIF-II->no clock->24Ch->DSub{rare!} AES/EBU-13->no clock->24Ch->DSub
5] MICROPHONES: There are many types of microphones, and several names for each type. The type of microphone doesn't equate to the polar pattern of the microphone. There are a few common polar patterns in microphones, but there are also several more that are less common. These are the main types- Omni-Directional, Figure 8 (bi-directional), Cardioid, Super Cardioid, Hyper Cardioid, Shotgun. Some light reading.... Now for the types of microphones: - Dynamic Microphones utilize polarized magnets to convert acoustical energy into electrical energy. there are 2 types of dynamic microphones: 1) Moving Coil microphones are the most common type of microphone made. They are also durable, and capable of handling VERY HIGH SPL (sound pressure levels). 2) Ribbon microphones are rare except in professional recording studios. Ribbon microphones are also incredibly fragile. NEVER EVER USE PHANTOM POWER WITH A RIBBON MICROPHONE, IT WILL DIE (unless it specifically requires it, but I've only ever seen this on one Ribbon microphone ever). Sometimes it might even smoke or shoot out a few sparks; applying phantom power to a Ribbon Microphone will literally cause the ribbon, which is normally made from Aluminum, to MELT. Also, windblasts and plosives can rip the ribbon, so these microphones are not suitible for things like horns, woodwinds, vocals, kick drums, or anything that "pushes air." There have been some advances in Ribbon microphones and they are getting to be more common, but they are still super fragile and you have to READ THE MANUAL CAREFULLY to avoid a $1k+ mistake. - CondenseCapacitor Microphones use an electrostatic charge to convert acoustical energy into electrical energy. The movement of the diaphragm(often metal coated mylar) toward a ceramic "backplate" causes a fluctuation in the charge, which is then amplified inside the microphone and output as an electrical signal. Condenser microphones usually use phantom power to charge the capacitors' and backplate in order to maintain the electrostatic charge. There are several types of condenser microphones: 1) Tube Condenser Microphones: historically, this type of microphone has been used in studios since the 1940s, and has been refined and redesigned hundreds, if not thousands of times. Some of the "best sounding" and most desired microphones EVER MADE are Tube Condenser microphones from the 50's and 60's. These vintage microphones, in good condition, with the original TUBES can sell for hundreds of thousands of dollars. Tube mics are known for sounding "full", "warm", and having a particular character, depending on the exact microphone. No 2 tubes mics, even of the same model, will sound the same. Similar, but not the same. Tube mics have their own power supplies, which are not interchangeable to different models. Each tube mic is a different design, and therefore, has different power requirements. 2) FET Condenser microphones: FET stands for "Field Effect Transistor" and the technology allowed condenser microphones to be miniturized. Take for example, the SHURE beta98s/d, which is a minicondenser microphone. FET technology is generally more transparant than tube technology, but can sometimes sound "harsh" or "sterile". 3) Electret Condenser Microphones are a condenser microphone that has a permanent charge, and therefore, does not require phantom power; however, the charge is not truly permanent, and these mics often use AA or 9V batteries, either inside the mic, or on a beltpack. These are less common.
Other important things to know about microphones:
- Pads, Rolloffs, etc: Some mics have switches or rotating collars that notate certain things. Most commonly, high pass filters/lowcut filters, or attenuation pads. 1) A HP/LC Filter does exactly what you might think: Removes low frequency content from the signal at a set frequency and slope. Some microphones allow you to switch the rolloff frequency. Common rolloff frequencies are 75hz, 80hz, 100hz, 120hz, 125hz, and 250hz. 2) A pad in this example is a switch that lowers the output of the microphone directly after the capsule to prevent overloading the input of a microphone preamplifier. You might be asking: How is that possible? Some microphones put out a VERY HIGH SIGNAL LEVEL, sometimes about line level(-10/+4dbu), mic level is generally accepted to start at -75dbu and continues increasing until it becomes line level in voltage. It should be noted that linel level signals are normally of a different impedance than mic level signals, which is determined by the gear. An example for this would be: I mic the top of a snare drum with a large diaphragm condenser mic (solid state mic, not tube) that is capable of handling very high SPLs (sound pressure levels). When the snare drum is played, the input of the mic preamp clips (distorts), even with the gain turned all the way down. To combat this, I would use a pad with enough attenuation to lower the signal into the proper range of input (-60db to -40 db). In general, it is accepted to use a pad with only as much attentuation as you need, plus a small margin of error for extra “headroom”. What this means is that if you use a 20db pad where you only need a 10db pad, you will then have to add an additional 10db of gain to achieve a desireable signal level. This can cause problems, as not all pads sound good, or even transparent, and can color and affect your signal in sometimes unwanted ways that are best left unamplified. - Other mic tips/info: 1) when recording vocals, you should always use a popfilter. A pop filter mounted on a gooseneck is generally more effective than a windscreen made of foam that slips over the microphone. The foam type often kill the highfrequency response, alter the polar pattern, and can introduce non-linear polarity problems(part of the frequency spectrum will be out of phase.) If you don't have a pop filter or don't want to spend on one, buy or obtain a hoop of some kind, buy some cheap panty-hose and stretch it over the hoop to build your own pop filter. 2) Terms Related to mics: - Plosives: “B”, “D”, “F”, “G”, “J”, “P”, “T” hard consonants and other vocal sounds that cause windblasts. These are responsible for a low frequency pop that can severly distort the diaphragm of the microphone, or cause a strange inconsistency of tonality by causing a short term proximity effect.
- Proximity effect: An exponential increase in low frequency response causes by having a microphone excessivly close to a sound. This can be cause by either the force of the air moving actually causes the microphone’s diaphragm to move and sometimes distort, usually on vocalists or buy the buildup of low frequency soundwaves due to off-axis cancellation ports. You cannot get proximity effect on an omnidirectional microphone. With some practice, you can use proximity effect to your advantage, or as an effect. For example, if you are recording someone whispering and it sounds thin or weak and irritating due to the intenese high mid and high frequency content, get the person very close to a cardioid microphone with two popfilters, back to back approx 1/2”-1” away from the mic and set your gain carefully, and you can achieve a very intimite recording of whispering. In a different scenario, you can place a mic inside of a kick drum between 1”-3” away from the inner shell, angled up and at the point of impact, and towards the floor tom. This usually captures a huge low end, and the sympathetic vibration of the floor tom on the kick drum hits, but retains a clarity of attack without being distorted by the SPL of the drum and without capturing unplesant low-mid resonation of the kick drum head and shell that is common directly in the middle of the shell.
6) Wave Envelope: The envelope is the graphical representation of a sound wave commonly found in a DAW. There are 4 parts to this: Attack, Decay, Sustain, Release: 1) Attack is how quickly the sound reaches its peak amplitude; 2) Decay is the time it takes to reach the sustain level; 3) Sustain how long a sound remains at a certain level (think of striking a tom, the initial smack is attack, then it decays to the resonance of the tom, how long it resonates is the sustain); 4) Release is the amount of time before the sustain stops. This is particularly important as these are also the settings on a common piece of gear called a Compressor! Understanding the envelope of a sound is key to learning how to maniuplate it.
7) Phase Cancellation: This is one of the most important concepts in home recording, especially when looking at drums. I'm putting it in this section because it matters so much. Phase Cancellation is what occurs when the same frequencies occur at different times. To put it simply, frequency amplitudes are additive - meaning if you have 2 sound waves of the same frequency, one amplitude is +4 and the other is +2, the way we percieve sound is that the frequency is +6. But a sound wave has a positive and negative amplitude as it travels (like a wave in the ocean with a peak and a swell). If the frequency then has two sources and it is 180 degrees out of phase, that means one wave is at +4 while the other is at -4. This sums to 0, or cancels out the wave. Effectively, you would hear silence. This is why micing techniques are so important, but we'll get into that later. I wanted this term at the top, and will likely mention it again.

Next we can look at the different types of options to actually record your sound!

1) Handheld/All in one/Field Recorders: I don't know if portable cassette tape recorders are still around, but that's an example of one. These are (or used to) be very popular with journalists because they were pretty decent at capturing speech. They do not fare too well with music though. Not too long ago, we saw the emergence of the digital field recorder. These are really nifty little devices. They come in many shapes, sizes and colors, and can be very affordable. They run on batteries, and have built-in microphones, and record digitally onto SD cards or harddiscs. The more simple ones have a pair of built-in condenser microphones, which may or may not be adjustable, and record onto an SD-card. They start around $99 (or less if you don't mind buying refurbished). You turn it on, record, connect the device itself or the SD card to your computer, transfer the file(s) and there is your recording! An entry-level example is the Tascam DR-05. It costs $99. It has two built in omni-directional mics, comes with a 2GB microSD card and runs on two AA batteries. It can record in different formats, the highest being 24-bit 96KHz Broadcast WAV, which is higher than DVD quality! You can also choose to record as an MP3 (32-320kbps) if you need to save space on the SD card or if you're simply going to record a speech/conference or upload it on the web later on. It's got a headphone jack and even small built-in speakers. It can be mounted onto a tripod. And it's about the size of a cell phone. The next step up (although there are of course many options that are price and feature-wise inbetween this one and the last) is a beefier device like the Zoom H4n. It's got all the same features as the Tascam DR-05 and more! It has two adjustable built-in cardioid condenser mics in an XY configuration (you can adjust the angle from a 90-120 degree spread). On the bottom of the device, there are two XLR inputs with preamps. With those, you can expand your recording possibilities with two external microphones. The preamps can send phantom power, so you can even use very nice studio mics. All 4 channels will be recorded independantly, so you can pop them onto your computer later and mix them with software. This device can also act as a USB interface, so instead of just using it as a field recorder, you can connect it directly to your computer or to a DSLR camera for HD filming. My new recommendation for this category is actually the Yamaha EAD10. It really is the best all-in-one solution for anyone that wants to record their kit audio with a great sound. It sports a kick drum trigger (mounts to the rim of the kick) with an x-y pattern set of microphones to pick up the rest of the kit sound. It also has on-board effects, lots of software integration options and smart features through its app. It really is a great solution for anyone who wants to record without reading this guide.
The TL;DR of this guide is - if it seems like too much, buy the Yamaha EAD10 as a simple but effective recording solution for your kit.

2) USB Microphones: There are actually mics that you an plug in directly to your computer via USB. The mics themselves are their own audio interfaces. These mics come in many shapes and sizes, and offer affordable solutions for basic home recording. You can record using a DAW or even something simple like the stock windows sound recorder program that's in the acessories folder of my Windows operating system. The Blue Snowflake is very affordable at $59. It can stand alone or you can attach it to your laptop or your flat screen monitor. It can record up to 44.1kHz, 16-bit WAV audio, which is CD quality. It's a condenser mic with a directional cardioid pickup pattern and has a full frequency response - from 35Hz-20kHz. It probably won't blow you away, but it's a big departure from your average built-in laptop, webcam, headset or desktop microphone. The Audio Technica AT2020 USB is a USB version of their popular AT2020 condenser microphone. At $100 it costs a little more than the regular version. The AT2020 is one of the finest mics in its price range. It's got a very clear sound and it can handle loud volumes. Other companies like Shure and Samson also offer USB versions of some of their studio mics. The AT2020 USB also records up to CD-quality audio and comes with a little desktop tripod. The MXL USB.009 mic is an all-out USB microphone. It features a 1 inch large-diaphragm condenser capsule and can record up to 24-bit 96kHz WAV audio. You can plug your headphones right into the mic (remember, it is its own audio interface) so you can monitor your recordings with no latency, as opposed to doing so with your computer. Switches on the mic control the gain and can blend the mic channel with playback audio. Cost: $399. If you already have a mic, or you don't want to be stuck with just a USB mic, you can purcase a USB converter for your existing microphone. Here is a great review of four of them.
3) Audio Recording Interfaces: You've done some reading up on this stuff... now you are lost. Welcome to the wide, wide world of Audio Interfaces. These come in all different shapes and sizes, features, sampling rates, bit depths, inputs, outputs, you name it. Welcome to the ocean, let's try to help you find land.
- An audio interface, as far as your computer is concerned, is an external sound card. It has audio inputs, such as a microphone preamp and outputs which connect to other audio devices or to headphones or speakers. The modern day recording "rig" is based around a computer, and to get the sound onto your computer, an interface is necessary. All computers have a sound card of some sort, but these have very low quality A/D Converters (analog to digital) and were not designed with any kind of sophisticated audio recording in mind, so for us they are useless and a dedicated audio interface must come into play.
- There are hundreds of interfaces out there. Most commonly they connect to a computer via USB or Firewire. There are also PCI and PCI Express-based interfaces for desktop computers. The most simple interfaces can record one channel via USB, while others can record up to 30 via firewire! All of the connection types into the computer have their advantages and drawbacks. The chances are, you are looking at USB, Firewire, or Thunderbolt. As far as speeds, most interfaces are in the same realm as far as speed is concerned but thunderbolt is a faster data transfer rate. There are some differences in terms of CPU load. Conflict handling (when packages collide) is handled differently. USB sends conflict resolution to the CPU, Firewire handles it internally, Thunderbolt, from what I could find, sends it to the CPU as well. For most applications, none of them are going to be superior from a home-recording standpoint. When you get up to 16/24 channels in/out simultaneously, it's going to matter a lot more.
- There are a number of things to consider when choosing an audio interface. First off your budget, number of channels you'd like to be able to record simultaneously, your monitoring system, your computer and operating system and your applications. Regarding budget, you have to get real. $500 is not going to get you a rig with the ability to multi-track a drum set covered in mics. Not even close! You might get an interface with 8 channels for that much, but you have to factor in the cost of everything, including mics, cables, stands, monitors/headphones, software, etc... Considerations: Stereo Recording or Multi-Track Recording? Stereo Recording is recording two tracks: A left and right channel, which reflects most audio playback systems. This doesn't necessarily mean you are simply recording with two mics, it means that what your rig is recording onto your computer is a single stereo track. You could be recording a 5-piece band with 16 mics/channels, but if you're recording in stereo, all you're getting is a summation of those 16 tracks. This means that in your recording software, you won't be able to manipulate any of those channels independantly after you recorded them. If the rack tom mic wasn't turned up loud enough, or you want to mute the guitars, you can't do that, because all you have is a stereo track of everything. It's up to you to get your levels and balance and tone right before you hit record. If you are only using two mics or lines, then you will have individual control over each mic/line after recording. Commonly, you can find 2 input interfaces and use a sub-mixer taking the left/right outputs and pluging those into each channel of the interface. Some mixers will output a stereo pair into a computer as an interface, such as the Allen&Heath ZED16. If you want full control over every single input, you need to multi-track. Each mic or line that you are recording with will get it's own track in your DAW software, which you can edit and process after the fact. This gives you a lot of control over a recording, and opens up many mixing options, and also many more issues. Interfaces that facilitate multitracking include Presonus FireStudio, Focusrite Scarlett interfaces, etc. There are some mixers that are also interfaces, such as the Presonus StudioLive 16, but these are very expensive. There are core-card interfaces as well, these will plug in directly to your motherboard via PCI or PCI-Express slots. Protools HD is a core-card interface and requires more hardware than just the card to work. I would recommend steering clear of these until you have a firm grasp of signal chain and digital audio, as there are more affordable solutions that will yield similar results in a home-environment.

DAW - Digital Audio Workstation

I've talked a lot about theory, hardware, signal chain, etc... but we need a way to interpret this data. First off what does a DAW do? Some refer to them as DAE's (Digital Audio Editors). You could call it a virtual mixing board , however that isn't entirely correct. DAWs allow you to record, control, mix and manipulate independant audio signals. You can change their volume, add effects, splice and dice tracks, combine recorded audio with MIDI-generated audio, record MIDI tracks and much much more. In the old days, when studios were based around large consoles, the actual audio needed to be recorded onto some kind of medium - analog tape. The audio signals passed through the boards, and were printed onto the tape, and the tape decks were used to play back the audio, and any cutting, overdubbing etc. had to be done physically on the tape. With a DAW, your audio is converted into 1's and 0's through the converters on your interface when you record, and so computers and their harddiscs have largely taken the place of reel-to-reel machines and analog tape.
Here is a list of commonly used DAWs in alphabetical order: ACID Pro Apple Logic Cakewalk SONAR Digital Performer FL (Fruity Loops) Studio (only versions 8 and higher can actually record Audio I believe) GarageBand PreSonus Studio One Pro Tools REAPER Propellerhead Reason (version 6 has combined Reason and Record into one software, so it now is a full audio DAW. Earlier versions of Reason are MIDI based and don't record audio) Propellerhead Record (see above) Steinberg Cubase Steinberg Nuendo
There are of course many more, but these are the main contenders. [Note that not all DAWs actually have audio recording capabilities (All the ones I listed do, because this thread is about audio recording), because many of them are designed for applications like MIDI composing, looping, etc. Some are relatively new, others have been around for a while, and have undergone many updates and transformations. Most have different versions, that cater to different types of recording communities, such as home recording/consumer or professional.
That's a whole lot of choices. You have to do a lot of research to understand what each one offers, what limitations they may have etc... Logic, Garageband and Digital Performer for instance are Mac-only. ACID Pro, FL Studio and SONAR will only run on Windows machines. Garageband is free and is even pre-installed on every Mac computer. Most other DAWs cost something.
Reaper is a standout. A non-commercial license only costs $60. Other DAWs often come bundled with interfaces, such as ProTools MP with M-Audio interfaces, Steinberg Cubase LE with Lexicon Interfaces, Studio One with Presonus Interfaces etc. Reaper is a full function, professional, affordable DAW with a tremendous community behind it. It's my recommendation for everyone, and comes with a free trial. It is universally compatible and not hardware-bound.
You of course don't have to purchase a bundle. Your research might yield that a particular interface will suit your needs well, but the software that the same company offers or even bundles isn't that hot. As a consumer you have a plethora of software and hardware manufacturers competing for your business and there is no shortage of choice. One thing to think about though is compatability and customer support. With some exceptions, technically you can run most DAWs with most interfaces. But again, don't just assume this, do your research! Also, some DAWs will run smoother on certain interfaces, and might experience problems on others. It's not a bad thing to assume that if you purchase the software and hardware from the same company, they're at least somewhat optimized for eachother. In fact, ProTools, until recently would only run on Digidesign (now AVID) and M-Audio interfaces. While many folks didn't like being limited to their hardware choices to run ProTools, a lot of users didn't mind, because I think that at least in part it made ProTools run smoother for everyone, and if you did have a problem, you only had to call up one company. There are many documented cases where consumers with software and hardware from different companies get the runaround:
Software Company X: "It's a hardware issue, call Hardware Company Z". Hardware Company Z: "It's a software issue, call Software Company X".
Another thing to research is the different versions of softwares. Many of them have different versions at different pricepoints, such as entry-level or student versions all the way up to versions catering to the pros. Cheaper versions come with limitations, whether it be a maximum number of audio tracks you can run simultaneously, plug-ins available or supported Plug-In formats and lack of other features that the upper versions have. Some Pro versions might require you to run certain kinds of hardware. I don't have time nor the will to do research on individual DAW's, so if any of you want to make a comparison of different versions of a specific DAW, be my guest! In the end, like I keep stressing - we each have to do our own research.
A big thing about the DAW that it is important to note is this: Your signal chain is your DAW. It is the digital representation of that chain and it is important to understand it in order to properly use that DAW. It is how you route the signal from one spot to another, how you move it through a sidechain compressor or bus the drums into the main fader. It is a digital representation of a large-format recording console, and if you don't understand how the signal gets from the sound source to your monitor (speaker), you're going to have a bad time.

Playback - Monitors are not just for looking at!

I've mentioned monitors several times and wanted to touch on these quickly: Monitors are whatever you are using to listen to the sound. These can be headphones, powered speakers, unpowered speakers, etc. The key thing here is that they are accurate. You want a good depth of field, you want as wide a frequency response as you can get, and you want NEARFIELD monitors. Unless you are working with a space that can put the monitor 8' away from you, 6" is really the biggest speaker size you need. At that point, nearfield monitors will reproduce the audio frequency range faithfully for you. There are many options here, closed back headphones, open back headphones, studio monitors powered, and unpowered (require a separate poweramp to drive the monitor). For headphones, I recommend AKG K271, K872, Sennheiser HD280 Pro, etc. There are many options, but if mixing on headphones I recommend spending some good money on a set. For Powered Monitors, there's really only one choice I recommend: Kali Audio LP-6 monitors. They are, dollar for dollar, the best monitors you can buy for a home studio, period. These things contend with Genelecs and cost a quarter of the price. Yes, they still cost a bit, but if you're going to invest, invest wisely. I don't recommend unpowered monitors, as if you skimp on the poweramp they lose all the advantages you gain with monitors. Just get the powered monitors if you are opting for not headphones.

Drum Mic'ing Guide, I'm not going to re-create the wheel.


That's all for now, this has taken some time to put together (a couple hourse now). I can answer other questions as they pop up. I used a few sources for the information, most notably some well-put together sections on the Pearl Drummers Forum in the recording section. I know a couple of the users are no longer active there, but if you see this and think "Hey, he ripped me off!", you're right, and thanks for allowing me to rip you off!

A couple other tips that I've come across for home recording:
You need to manage your gain/levels when recording. Digital is NOT analog! What does this mean? You should be PEAKING (the loudest the signal gets) around -12dB to -15dB on your meters. Any hotter than that and you are overdriving your digital signal processors.
What sound level should my master bus be at for Youtube?
Bass Traps 101
Sound Proofing 101
submitted by M3lllvar to drums [link] [comments]

Free Software Auto Trade Binary Option - Accurate 95% - live trading NEW TRICK IQ BINARY OPTION SOFTWARE FREE DOWNLOAD Trading Signal ... Free Binary Options Live Stream Signal App ️ 100% Accuracy ... Best Binary Option Software 100% Free 2019 binary options signals available! 3 day free trial! FREE trial!… Bots Live Trading Room  binary options ...

http://tinyurl.com/kw25f2mBinary Options Signals - 45 Days Free Trial Binary,Options,Signals,45,Days,Free,Trial Here we list and compare the best binary options demo accounts with no deposit requirements 2020, and look at whether a free demo account really is ‘free’ and even where you can get a trial account with no sign up at all. For traders, a free demo account makes a lot of sense. You get to try the trading platform, or a mobile demo app, at no ... There are some binary option signal types available that produce sound advice. It is wise for you to review the models on offer to ascertain the most suitable for your needs. It is possible to receive signals through software, and these types are also listed below. Some signals providers have a free trial period so you can evaluate the service. Ideally you want a set amount of daily signals so ... The software belongs to Business Tools. The most popular versions among Binary Option Robot users are 2.0, 1.9 and 1.8. This free software is a product of Binary Options Robot. This free PC software was developed to work on Windows XP, Windows Vista, Windows 7, Windows 8 or Windows 10 and is compatible with 32-bit systems. Binary Option Robot ... In addition to the free binary robot software, you will need to get a real account with a broker. The software will normally recommend binary options brokers to open an account and deposit with. Programme The Software. We don't mean that you need to be a programmer to operate the software, but you do need to tell it what you want. Set your technical indicators which will include your investing ... Free binary options trading software for for free trial trial 7 days free trial …. Binary Signals Free Trial Binary Signals Free Trial. The website says that the offer expires in under 10 minutes but if you refresh the page you will see that this is not true For instance, it offers a speed trading service with up to 5-minute increments and hourly binary options in 15-minute increments. I ... The answer is both the above beliefs are accurate. Free trading signals can be both profitable and ineffective as well. Sometimes, signal providers provide free binary options signals on a test/trial basis. This can be provided in the form of free binary options signals software or just simply as signals. Binary Options Robot is highly appreciated auto trading software for binary options trading. Let’s point out that the Binary Options Robot is completely free auto trading software available to traders around the world. Still, Binary Options Robot isn’t accepting traders from the USA at the moment. It offers the opportunity to trade with the ... Access free binary options signals with a consistent 72%+ success rate and join over 20,000 members currently profiting from binary options. Get the signals needed to supplement your binary options trading strategy. No software required! Binary Options Signals are provided to traders to notify them when a new trading opportunity is available. My signals are extremely easy to follow and only ... Free Binary Options Signals. So, if you do not have the time or if you do not feel comfortable enough to make your own predictions and put your money behind them, this is the place for you because BinaryOptionsTrading-Review.com has decided to reward our readers with free Binary Options Signals! This is our way to say thank you for your trust ...

[index] [1399] [11014] [12565] [10981] [4167] [24399] [28297] [9979] [22139] [5328]

Free Software Auto Trade Binary Option - Accurate 95% - live trading NEW TRICK

It’s Time To Try And Improve Together With The BOTS Community Strategy Development Room For Forex, Nadex Options & More!.. Try out our FREE trial Click here:... 👉 Free Forex And Binary Options Live Signal https://bit.ly/3cIsicC 👉👉👉This Live Signal Works Only Below 2 Broker👇👇👇 Reliable Binary Options Broker with a ... Please contact me on WhatsApp for your free 3 day trial +19055415611. You can also add me on Instagram diego_tradersdivision. I will be offering forex signals very soon.. just back testing ... Skip trial. 1 month free. Find out why Close. #IqOption #Binaryoption #option. Best Binary Option Software 100% Free 2019 Fx Signalspot. Loading... Unsubscribe from Fx Signalspot? Cancel ... Please Subscribe to get more free good trading robot FREE : http://bit.ly/2DBZhzv Download the free bot below this link To get more best pro BOT contact emai... Skip trial. 1 month free. Find out why Close. #SUCCESSTRADING #SUCCESSTRADINGTV. Free Software Auto Trade Binary Option - Accurate 95% - live trading NEW TRICK SUCCESS TRADING. Loading ...

http://binary-optiontrade.palmpromenfid.cf